老主板安装OS X El Capitan出现白色禁止符号

alex051012

clover启动日志如下：
0:100  0:100  MemLog inited, TSC freq: 3166314311
0:100  0:000  LegacyRegion2: Chipset/proc: 0x2E208086
0:100  0:000   Intel Series 4 and similar (PAM 0x90-0x96)
0:100  0:000   Test PAM1=(0x41=90, 0x5a=00, 0x81=00, 0x91=11) at chipset 2E208086
0:100  0:000  , Install = Success
0:111  0:011  BiosVideoDriverBindingStart!
0:111  0:000  BiosVideoCheckForVbe
0:111  0:000  EdidOverride not found
0:304  0:192   Edid1-
0:368  0:064   Edid0+
0:368  0:000   found Detail Timing 1600x900
0:388  0:019     0 640x480 attr=3BF - ok, edid+, 640x480, working, highest, pref=0
0:388  0:000     1 800x600 attr=3BF - ok, edid+, 800x600, working, highest, pref=1
0:389  0:000     2 1024x768 attr=3BF - ok, edid+, 1024x768, working, highest, pref=2
0:389  0:000     3 1280x1024 attr=3BF - ok, edid+, working, highest, pref=3
0:393  0:003     4 1600x1200 attr=3BF - ok, edid-
0:393  0:000  BV new mode: 3 1280x1024
0:825  0:431   SetMode pref 3 (3) = Success
3:284  2:459  
3:284  0:000  Now is 27.10.2015,  10:47:32 (GMT+2047)
3:284  0:000  Starting Clover rev 3270 on CLOVER EFI
3:284  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1A,0x7)\USB(0x1,0x0)\HD(1,MBR,0x01310A81,0x1000,0x64000) @DE5DB518
3:284  0:000  SelfDirPath = \EFI\CLOVER
3:284  0:000  Total Memory Slots Count = 4
3:284  0:000  Type 17 Index = 0
3:284  0:000  Ignoring insane frequency value 0MHz
3:284  0:000  SmbiosTable.Type17->Speed = 0MHz
3:284  0:000  SmbiosTable.Type17->Size = 0MB
3:284  0:000  SmbiosTable.Type17->Bank/Device = Bank0/1 A0
3:284  0:000  Type 17 Index = 1
3:284  0:000  SmbiosTable.Type17->Speed = 400MHz
3:284  0:000  SmbiosTable.Type17->Size = 4096MB
3:284  0:000  SmbiosTable.Type17->Bank/Device = Bank2/3 A1
3:284  0:000  Type 17 Index = 2
3:284  0:000  Ignoring insane frequency value 0MHz
3:284  0:000  SmbiosTable.Type17->Speed = 0MHz
3:284  0:000  SmbiosTable.Type17->Size = 0MB
3:284  0:000  SmbiosTable.Type17->Bank/Device = Bank4/5 A2
3:284  0:000  Type 17 Index = 3
3:284  0:000  Ignoring insane frequency value 0MHz
3:284  0:000  SmbiosTable.Type17->Speed = 0MHz
3:284  0:000  SmbiosTable.Type17->Size = 0MB
3:284  0:000  SmbiosTable.Type17->Bank/Device = Bank6/7 A3
3:284  0:000  Boot status=0
3:284  0:000  Clover revision: 3270  running on EP43T-UD3L
3:284  0:000  ... with board EP43T-UD3L
3:284  0:000  CPU Vendor = 756E6547 Model=1067A
3:284  0:000  The CPU not supported turbo
3:284  0:000  BrandString = Intel(R) Core(TM)2 Duo CPU     E8500  @ 3.16GHz
3:284  0:000  MSR dumps:
3:284  0:000   @0x00CD=80000804
3:284  0:000   @0x0198=613491F0600491F
3:284  0:000  FSBFrequency=421MHz DMIvalue=333330kHz
3:284  0:000  Corrected FSBFrequency=333MHz
3:284  0:000  Vendor/Model/Stepping: 0x756E6547/0x17/0xA
3:284  0:000  Family/ExtFamily: 0x6/0x0
3:284  0:000  MaxDiv/MinDiv: 9.5/6
3:284  0:000  Turbo: 10/0/0/0
3:284  0:000  Features: 0xBFEBFBFF
3:284  0:000  Threads: 2
3:284  0:000  Cores: 1
3:284  0:000  FSB: 333 MHz
3:284  0:000  CPU: 4000 MHz
3:284  0:000  TSC: 4000 MHz
3:284  0:000  PIS: 1333 MHz
3:284  0:000  PCI (00|00:00.00) : 8086 2E20 class=060000
3:284  0:000  PCI (00|00:01.00) : 8086 2E21 class=060400
3:284  0:000  PCI (00|01:00.00) : 10DE 0614 class=030000
3:284  0:000  Found NVidia model=GeForce 9800 GT
3:284  0:000  PCI (00|00:1A.00) : 8086 3A37 class=0C0300
3:284  0:000  PCI (00|00:1A.01) : 8086 3A38 class=0C0300
3:284  0:000  PCI (00|00:1A.02) : 8086 3A39 class=0C0300
3:284  0:000  PCI (00|00:1A.07) : 8086 3A3C class=0C0320
3:284  0:000  PCI (00|00:1B.00) : 8086 3A3E class=040300
3:284  0:000  PCI (00|00:1C.00) : 8086 3A40 class=060400
3:284  0:000  PCI (00|00:1C.04) : 8086 3A48 class=060400
3:285  0:000  PCI (00|03:00.00) : 197B 2368 class=010185
3:285  0:000  PCI (00|00:1C.05) : 8086 3A4A class=060400
3:285  0:000  PCI (00|04:00.00) : 10EC 8168 class=020000
3:285  0:000  LAN 0, Vendor=10EC, MMIO=CE00
3:285  0:000  PCI (00|00:1D.00) : 8086 3A34 class=0C0300
3:285  0:000  PCI (00|00:1D.01) : 8086 3A35 class=0C0300
3:285  0:000  PCI (00|00:1D.02) : 8086 3A36 class=0C0300
3:285  0:000  PCI (00|00:1D.07) : 8086 3A3A class=0C0320
3:285  0:000  PCI (00|00:1E.00) : 8086 244E class=060401
3:285  0:000  PCI (00|00:1F.00) : 8086 3A18 class=060100
3:285  0:000  PCI (00|00:1F.02) : 8086 3A20 class=01018A
3:285  0:000  PCI (00|00:1F.03) : 8086 3A30 class=0C0500
3:285  0:000  PCI (00|00:1F.05) : 8086 3A26 class=010185
3:285  0:000  Clover load options size = 0 bytes
3:314  0:028  Using OEM config.plist at path: EFI\CLOVER\config.plist
3:314  0:000  EFI\CLOVER\config.plist loaded: Success
3:327  0:013  Found theme directory: black_green
3:353  0:026  Found theme directory: embedded
3:366  0:013  Found theme directory: random
3:366  0:000  Loading early settings
3:366  0:000  timeout set to 5
3:366  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
3:366  0:000  Default theme: black_green
3:366  0:000  LoadDrivers() start
3:366  0:000  LoadDrivers() end
3:366  0:000  Console modes reported: 4, available modes:
3:366  0:000    Mode 1: 80x25
3:366  0:000    Mode 2: 80x50
3:366  0:000    Mode 3: 100x31
3:366  0:000    Mode 4: 160x53 (current mode)
3:367  0:000  SetScreenResolution: 1280x1024 - already set
3:367  0:000  reinit: self device path=PcieRoot(0x0)\Pci(0x1A,0x7)\USB(0x1,0x0)\HD(1,MBR,0x01310A81,0x1000,0x64000)
3:367  0:000  ScanSPD() start
3:367  0:000  SMBus CmdReg: 0x3
3:367  0:000  Scanning SMBus [8086:3A30], mmio: 0xFDFFD004, ioport: 0x500, hostc: 0x1
3:367  0:000  Slots to scan [8]...
3:389  0:021  SPD[1]: Type 11 @0x51
3:397  0:008  DDR speed 1600MHz
3:397  0:000  Slot: 1 Type 24 4096MB 1600MHz Vendor=Samsung PartNo=9905471-006.A00LF SerialNo=06050200060C0103
3:443  0:045  ScanSPD() end
3:448  0:004  Get Acpi Tables List from RSDT:
3:448  0:000   Found table: FACP  GBTUACPI len=116
3:448  0:000   Found table: HPET  GBTUACPI len=56
3:448  0:000   Found table: MCFG  GBTUACPI len=60
3:448  0:000   Found table: EUDS   len=1376
3:448  0:000   Found table: TAMG  GBT   B0 len=26378
3:448  0:000   Found table: APIC  GBTUACPI len=132
3:448  0:000   Found table: SSDT  CpuPm len=939
3:448  0:000  Calibrated TSC frequency =3166314311 =3166MHz
3:448  0:000  Loading main settings
3:448  0:000  USB FixOwnership: true
3:448  0:000  Config set Fixes will override FixMask mask!
3:448  0:000     final mask=00000324
3:448  0:000  Config set ChassisType=0xD
3:448  0:000  found 16 volumes with blockIO
3:448  0:000   0. Volume:
3:448  0:000    PcieRoot(0x0)\Pci(0x1A,0x7)\USB(0x1,0x0)
3:459  0:011    Result of bootcode detection: bootable unknown (legacy)
3:459  0:000    USB volume
3:459  0:000   1. Volume:
3:459  0:000    PcieRoot(0x0)\Pci(0x1A,0x7)\USB(0x1,0x0)\HD(1,MBR,0x01310A81,0x1000,0x64000)
3:471  0:011    Result of bootcode detection: bootable Clover (clover)
3:471  0:000    USB volume
3:471  0:000    This is SelfVolume !!
3:471  0:000   2. Volume:
3:471  0:000    PcieRoot(0x0)\Pci(0x1A,0x7)\USB(0x1,0x0)\HD(2,MBR,0x01310A81,0x65000,0x1F73000)
3:482  0:011    USB volume
3:482  0:000   3. Volume:
3:482  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)
3:482  0:000    Result of bootcode detection: bootable unknown (legacy)
3:482  0:000   4. Volume:
3:482  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)
3:483  0:000    Result of bootcode detection: bootable unknown (legacy)
3:483  0:000   5. Volume:
3:483  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)\HD(1,GPT,784CD8B1-7E74-4B16-9686-CBD035828B86,0x28,0x64000)
3:483  0:000    Result of bootcode detection: bootable Clover (clover)
3:502  0:018   6. Volume:
3:502  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)\HD(2,GPT,9DFB6982-041D-41F4-893D-DDCB646FE913,0x64028,0x12910000)
3:502  0:000   7. Volume:
3:502  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)\HD(3,GPT,D957991A-1DD6-4E79-8FDC-B9853EFF8AB0,0x12974028,0x135F20)
3:502  0:000   8. Volume:
3:502  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)\HD(4,GPT,F62BE4A3-4FD4-47E5-8204-EDAB4BBD8957,0x12AA9F48,0x4BAB8278)
3:502  0:000   9. Volume:
3:502  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)\HD(5,GPT,07AF6797-9000-4740-9C48-E2DB149A1B7A,0x5E5A21C0,0x16124BC8)
3:502  0:000  10. Volume:
3:502  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)\HD(1,MBR,0x45AB45AA,0x1000,0xA001000)
3:503  0:000    Result of bootcode detection: bootable Windows (vista,win)
3:503  0:000  11. Volume:
3:503  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)\HD(2,MBR,0x45AB45AA,0xA002000,0xC801000)
3:503  0:000    Result of bootcode detection: bootable Windows (win)
3:503  0:000  12. Volume:
3:503  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)\HD(3,MBR,0x45AB45AA,0x16803000,0x5DF029C1)
3:503  0:000    Result of bootcode detection: bootable unknown (legacy)
3:503  0:000  13. Volume:
3:503  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)\HD(3,MBR,0x45AB45AA,0x16803000,0x5DF029C1)\HD(1,MBR,0x00000000,0x16804000,0x2F001000)
3:503  0:000    Result of bootcode detection: bootable Windows (win)
3:503  0:000  14. Volume:
3:503  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)\HD(3,MBR,0x45AB45AA,0x16803000,0x5DF029C1)\HD(2,MBR,0x00000000,0x45806000,0x2DB779C1)
3:503  0:000    Result of bootcode detection: bootable Windows (win)
3:504  0:000  15. Volume:
3:504  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Ata(0x0)\HD(3,MBR,0x45AB45AA,0x16803000,0x5DF029C1)\HD(3,MBR,0x00000000,0x7337E000,0x1387800)
3:506  0:002  PutNvramPlistToRtVars: nvram.plist not found
3:506  0:000  Using theme 'black_green' (EFI\CLOVER\themes\black_green)
3:506  0:000  OS main and drive as badge
3:510  0:004  Choosing theme black_green
3:510  0:000  Custom entries start
3:510  0:000  Custom entries finish
3:510  0:000  Scanning loaders...
3:510  0:000   0: 'Whole Disc Boot' no file system
3:510  0:000   1: 'CLOVER'
3:632  0:121   2: 'Yosemite Install(14F27)'
3:655  0:023      AddLoaderEntry for Volume Name=Yosemite Install(14F27)
3:702  0:046      Check if volume Is Hibernated:
3:702  0:000      Check sleep image 'by signature':
3:749  0:046      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found
3:749  0:000      using default sleep image name = \private\var\vm\sleepimage
3:808  0:059      sleepimage not found -> Not Found
3:808  0:000       hibernated: no - sign
3:842  0:034   3: 'Whole Disc Boot' no file system
3:842  0:000   4: 'Whole Disc Boot' no file system
3:842  0:000   5: 'EFI'
3:865  0:022   6: 'Yosemite '
3:894  0:029      AddLoaderEntry for Volume Name=Yosemite
3:920  0:025      Check if volume Is Hibernated:
3:920  0:000      Check sleep image 'by signature':
3:954  0:034      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
3:954  0:000      SleepImage name from pref: ImageVolume = 'Yosemite ', ImageName = '\private\var\vm\sleepimage'
3:979  0:024      sleepimage not found -> Not Found
3:979  0:000       hibernated: no - sign
3:980  0:001    Icon 17 (icons\vol_internal_hfs.icns) not found
3:980  0:000    Theme path EFI\CLOVER\themes\black_green, ThemeDir=DD9FF720
4:027  0:046   7: 'Recovery HD'
4:027  0:000      AddLoaderEntry for Volume Name=Recovery HD
4:064  0:037   8: 'mac date'
4:082  0:017   9: 'mac backup'
4:100  0:018  10: 'Legacy HD1' no file system
4:100  0:000  11: 'Legacy HD2' no file system
4:100  0:000  12: 'Legacy HD3' no file system
4:100  0:000  13: 'Legacy HD1' no file system
4:100  0:000  14: 'Legacy HD2' no file system
4:100  0:000  15: 'OS X Base System'
4:121  0:020      AddLoaderEntry for Volume Name=OS X Base System
4:131  0:009      Check if volume Is Hibernated:
4:131  0:000      Check sleep image 'by signature':
4:142  0:010      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found
4:142  0:000      using default sleep image name = \private\var\vm\sleepimage
4:155  0:012      sleepimage not found -> Not Found
4:155  0:000       hibernated: no - sign
4:174  0:019  Custom legacy start
4:174  0:000  Custom legacy end
4:174  0:000  Scanning legacy ...
4:174  0:000   0: 'Whole Disc Boot' (legacy) not legacy
4:174  0:000   1: 'CLOVER' (clover) add legacy
4:176  0:001   added 'Boot Clover from CLOVER' OSType=3 Icon=clover
4:176  0:000   2: 'Yosemite Install(14F27)' (legacy) not legacy
4:176  0:000   3: 'Whole Disc Boot' (legacy) not legacy
4:176  0:000   4: 'Whole Disc Boot' (legacy) not legacy
4:176  0:000   5: 'EFI' (clover) add legacy
4:180  0:004   added 'Boot Clover from EFI' OSType=3 Icon=clover
4:180  0:000   6: 'Yosemite ' (legacy) not legacy
4:180  0:000   7: 'Recovery HD' (legacy) not legacy
4:180  0:000   8: 'mac date' (legacy) not legacy
4:180  0:000   9: 'mac backup' (legacy) not legacy
4:180  0:000  10: 'Legacy HD1' (vista,win) add legacy
4:184  0:004   added 'Boot Windows from Legacy HD1' OSType=2 Icon=vista,win
4:184  0:000  11: 'Legacy HD2' (win) add legacy
4:185  0:001   added 'Boot Windows from Legacy HD2' OSType=2 Icon=win
4:185  0:000  12: 'Legacy HD3' (legacy) not legacy
4:185  0:000  13: 'Legacy HD1' (win) add legacy
4:187  0:001   added 'Boot Windows from Legacy HD1' OSType=2 Icon=win
4:187  0:000  14: 'Legacy HD2' (win) add legacy
4:188  0:001   added 'Boot Windows from Legacy HD2' OSType=2 Icon=win
4:188  0:000  15: 'OS X Base System' (legacy) not legacy
4:188  0:000  Custom tool start
4:188  0:000  Custom tool end
4:202  0:013  found tool \EFI\CLOVER\tools\Shell64U.efi
4:202  0:000  Checking EFI partition Volume 5 for Clover
4:221  0:019   Found Clover
4:236  0:014  GetEfiBootDeviceFromNvram: efi-boot-device-data not found
4:236  0:000  EfiBootVolume not found
4:236  0:000  Default boot entry not found
4:236  0:000  DefaultIndex=-1 and MainMenu.EntryCount=16
4:236  0:000  Use anime=Anim_1_Logo_IntroOutro frames=381
4:608  0:372  Found Mouse device:
4:608  0:000  GUI ready

bigapplepro

小白表示看不懂英文啊

sdsy1212

看不懂英文啊。。。
但是 如果是老一点的主板 比如7系的 用osxaptiofixdrv 别用osxaptiofix2drv
如果是8系 9系 用osxaptiofix2drv
我之前也是有禁止符号 就这么解决的

JAMESM5

除了楼上还可以换个USB接口

semoggg

流过一些              

alex051012

sdsy1212 发表于 2015-10-27 19:42
看不懂英文啊。。。
但是 如果是老一点的主板 比如7系的 用osxaptiofixdrv 别用osxaptiofix2drv
如果是8系 ...

试过你的方法，问题依旧。

czczyx

一大片日志，唯独没有硬件配置和config配置、kexts