英特尔® 酷睿™ i3 处理器的版本可直接用本文的所有附件，其他处理器的仅供参考。
采用Clover最新版本引导
安装时的Clover配置如下
安装原版El Capitan，用Apple官方制作启动盘的方法（https://support.apple.com/zh-cn/HT201372）老是出现禁止符号，于是用UniBeast制作（http://www.tonymacx86.com/el-capitan-desktop-guides/172672-unibeast-install-os-x-el-capitan-any-supported-intel-based-pc.html#create_unibeast），终于进入安装界面。
安装好后，正常启动用到的Clover配置文件，用此配置文件引导，显卡可正确识别，并以原生分辨率输出（还不是32位真彩色），将附件的kexts安装到L/E下，其中电池电量显示需在DSDT中添加以下代码：
into method label B1B2 remove_entry;
into definitionblock code_regex . insert
begin
Method (B1B2, 2, NotSerialized) { Return (Or (Arg0, ShiftLeft (Arg1, 8))) }\n
end;
# not really for battery, but might come in handy to read fan speed(s)
into device label EC0 code_regex TAH0,\s+16 replace_matched begin TH00,8,TH01,8 end;
into device label EC0 code_regex TAH1,\s+16 replace_matched begin TH10,8,TH11,8 end;
into method label TACH code_regex \(TAH0, replace_matched begin (B1B2(TH00,TH01), end;
into method label TACH code_regex \(TAH1, replace_matched begin (B1B2(TH10,TH11), end;
into method label GFAN code_regex \(\\_SB\.PCI0\.LPCB\.EC0\.TAH0, replace_matched begin (B1B2(\\_SB.PCI0.LPCB.EC0.TH00,\\_SB.PCI0.LPCB.EC0.TH01), end;
# battery EC
into device label EC0 code_regex B0SN,\s+16 replace_matched begin B0S0,8,B0S1,8 end;
into device label EC0 code_regex B1SN,\s+16 replace_matched begin B1S0,8,B1S1,8 end;
into method label BIFA code_regex \(B0SN, replace_matched begin (B1B2(B0S0,B0S1), end;
into method label BIFA code_regex \(B1SN, replace_matched begin (B1B2(B1S0,B1S1), end;
into device label EC0 code_regex DT2B,\s+16 replace_matched begin T2B0,8,T2B1,8 end;
into method label SMBR code_regex \(DT2B, replace_matched begin (B1B2(T2B0,T2B1), end;
into method label SMBW code_regex Store\s+\(([^,]*),\s+DT2B\) replace_matched
begin
Store(%1,T2B0) Store(ShiftRight(%1,8),T2B1)
end;
into device label EC0 insert
begin
Method (RDBA, 0, Serialized)\n
{\n
Name (TEMP, Buffer(0x20) { })\n
Store (BA00, Index(TEMP, 0x00))\n
Store (BA01, Index(TEMP, 0x01))\n
Store (BA02, Index(TEMP, 0x02))\n
Store (BA03, Index(TEMP, 0x03))\n
Store (BA04, Index(TEMP, 0x04))\n
Store (BA05, Index(TEMP, 0x05))\n
Store (BA06, Index(TEMP, 0x06))\n
Store (BA07, Index(TEMP, 0x07))\n
Store (BA08, Index(TEMP, 0x08))\n
Store (BA09, Index(TEMP, 0x09))\n
Store (BA0A, Index(TEMP, 0x0A))\n
Store (BA0B, Index(TEMP, 0x0B))\n
Store (BA0C, Index(TEMP, 0x0C))\n
Store (BA0D, Index(TEMP, 0x0D))\n
Store (BA0E, Index(TEMP, 0x0E))\n
Store (BA0F, Index(TEMP, 0x0F))\n
Store (BA10, Index(TEMP, 0x10))\n
Store (BA11, Index(TEMP, 0x11))\n
Store (BA12, Index(TEMP, 0x12))\n
Store (BA13, Index(TEMP, 0x13))\n
Store (BA14, Index(TEMP, 0x14))\n
Store (BA15, Index(TEMP, 0x15))\n
Store (BA16, Index(TEMP, 0x16))\n
Store (BA17, Index(TEMP, 0x17))\n
Store (BA18, Index(TEMP, 0x18))\n
Store (BA19, Index(TEMP, 0x19))\n
Store (BA1A, Index(TEMP, 0x1A))\n
Store (BA1B, Index(TEMP, 0x1B))\n
Store (BA1C, Index(TEMP, 0x1C))\n
Store (BA1D, Index(TEMP, 0x1D))\n
Store (BA1E, Index(TEMP, 0x1E))\n
Store (BA1F, Index(TEMP, 0x1F))\n
Return (TEMP)\n
}\n
end;
into device label EC0 insert
begin
Method (WRBA, 1, Serialized)\n
{\n
Name (TEMP, Buffer(0x20) { })\n
Store (Arg0, TEMP)\n
Store (DerefOf(Index(TEMP, 0x00)), BA00)\n
Store (DerefOf(Index(TEMP, 0x01)), BA01)\n
Store (DerefOf(Index(TEMP, 0x02)), BA02)\n
Store (DerefOf(Index(TEMP, 0x03)), BA03)\n
Store (DerefOf(Index(TEMP, 0x04)), BA04)\n
Store (DerefOf(Index(TEMP, 0x05)), BA05)\n
Store (DerefOf(Index(TEMP, 0x06)), BA06)\n
Store (DerefOf(Index(TEMP, 0x07)), BA07)\n
Store (DerefOf(Index(TEMP, 0x08)), BA08)\n
Store (DerefOf(Index(TEMP, 0x09)), BA09)\n
Store (DerefOf(Index(TEMP, 0x0A)), BA0A)\n
Store (DerefOf(Index(TEMP, 0x0B)), BA0B)\n
Store (DerefOf(Index(TEMP, 0x0C)), BA0C)\n
Store (DerefOf(Index(TEMP, 0x0D)), BA0D)\n
Store (DerefOf(Index(TEMP, 0x0E)), BA0E)\n
Store (DerefOf(Index(TEMP, 0x0F)), BA0F)\n
Store (DerefOf(Index(TEMP, 0x10)), BA10)\n
Store (DerefOf(Index(TEMP, 0x11)), BA11)\n
Store (DerefOf(Index(TEMP, 0x12)), BA12)\n
Store (DerefOf(Index(TEMP, 0x13)), BA13)\n
Store (DerefOf(Index(TEMP, 0x14)), BA14)\n
Store (DerefOf(Index(TEMP, 0x15)), BA15)\n
Store (DerefOf(Index(TEMP, 0x16)), BA16)\n
Store (DerefOf(Index(TEMP, 0x17)), BA17)\n
Store (DerefOf(Index(TEMP, 0x18)), BA18)\n
Store (DerefOf(Index(TEMP, 0x19)), BA19)\n
Store (DerefOf(Index(TEMP, 0x1A)), BA1A)\n
Store (DerefOf(Index(TEMP, 0x1B)), BA1B)\n
Store (DerefOf(Index(TEMP, 0x1C)), BA1C)\n
Store (DerefOf(Index(TEMP, 0x1D)), BA1D)\n
Store (DerefOf(Index(TEMP, 0x1E)), BA1E)\n
Store (DerefOf(Index(TEMP, 0x1F)), BA1F)\n
}\n
end;
into device label EC0 code_regex BDAT,\s+256 replace_matched
begin
//BDAT, 256,\n
BA00,8,BA01,8,BA02,8,BA03,8,\n
BA04,8,BA05,8,BA06,8,BA07,8,\n
BA08,8,BA09,8,BA0A,8,BA0B,8,\n
BA0C,8,BA0D,8,BA0E,8,BA0F,8,\n
BA10,8,BA11,8,BA12,8,BA13,8,\n
BA14,8,BA15,8,BA16,8,BA17,8,\n
BA18,8,BA19,8,BA1A,8,BA1B,8,\n
BA1C,8,BA1D,8,BA1E,8,BA1F,8\n
end;
into method label SMBR code_regex \(BDAT, replaceall_matched begin (RDBA(), end;
into method label SMBR code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end;
into method label SMBW code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end;
into method label ECSB code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end;
into method label ECSB code_regex \(BDAT, replaceall_matched begin (RDBA(), end;
into device label EC0 insert
begin
Method (RDBB, 0, Serialized)\n
{\n
Name (TEMP, Buffer(0x20) { })\n
Store (BB00, Index(TEMP, 0x00))\n
Store (BB01, Index(TEMP, 0x01))\n
Store (BB02, Index(TEMP, 0x02))\n
Store (BB03, Index(TEMP, 0x03))\n
Store (BB04, Index(TEMP, 0x04))\n
Store (BB05, Index(TEMP, 0x05))\n
Store (BB06, Index(TEMP, 0x06))\n
Store (BB07, Index(TEMP, 0x07))\n
Store (BB08, Index(TEMP, 0x08))\n
Store (BB09, Index(TEMP, 0x09))\n
Store (BB0A, Index(TEMP, 0x0A))\n
Store (BB0B, Index(TEMP, 0x0B))\n
Store (BB0C, Index(TEMP, 0x0C))\n
Store (BB0D, Index(TEMP, 0x0D))\n
Store (BB0E, Index(TEMP, 0x0E))\n
Store (BB0F, Index(TEMP, 0x0F))\n
Store (BB10, Index(TEMP, 0x10))\n
Store (BB11, Index(TEMP, 0x11))\n
Store (BB12, Index(TEMP, 0x12))\n
Store (BB13, Index(TEMP, 0x13))\n
Store (BB14, Index(TEMP, 0x14))\n
Store (BB15, Index(TEMP, 0x15))\n
Store (BB16, Index(TEMP, 0x16))\n
Store (BB17, Index(TEMP, 0x17))\n
Store (BB18, Index(TEMP, 0x18))\n
Store (BB19, Index(TEMP, 0x19))\n
Store (BB1A, Index(TEMP, 0x1A))\n
Store (BB1B, Index(TEMP, 0x1B))\n
Store (BB1C, Index(TEMP, 0x1C))\n
Store (BB1D, Index(TEMP, 0x1D))\n
Store (BB1E, Index(TEMP, 0x1E))\n
Store (BB1F, Index(TEMP, 0x1F))\n
Return (TEMP)\n
}\n
end;
into device label EC0 insert
begin
Method (WRBB, 1, Serialized)\n
{\n
Name (TEMP, Buffer(0x20) { })\n
Store (Arg0, TEMP)\n
Store (DerefOf(Index(TEMP, 0x00)), BB00)\n
Store (DerefOf(Index(TEMP, 0x01)), BB01)\n
Store (DerefOf(Index(TEMP, 0x02)), BB02)\n
Store (DerefOf(Index(TEMP, 0x03)), BB03)\n
Store (DerefOf(Index(TEMP, 0x04)), BB04)\n
Store (DerefOf(Index(TEMP, 0x05)), BB05)\n
Store (DerefOf(Index(TEMP, 0x06)), BB06)\n
Store (DerefOf(Index(TEMP, 0x07)), BB07)\n
Store (DerefOf(Index(TEMP, 0x08)), BB08)\n
Store (DerefOf(Index(TEMP, 0x09)), BB09)\n
Store (DerefOf(Index(TEMP, 0x0A)), BB0A)\n
Store (DerefOf(Index(TEMP, 0x0B)), BB0B)\n
Store (DerefOf(Index(TEMP, 0x0C)), BB0C)\n
Store (DerefOf(Index(TEMP, 0x0D)), BB0D)\n
Store (DerefOf(Index(TEMP, 0x0E)), BB0E)\n
Store (DerefOf(Index(TEMP, 0x0F)), BB0F)\n
Store (DerefOf(Index(TEMP, 0x10)), BB10)\n
Store (DerefOf(Index(TEMP, 0x11)), BB11)\n
Store (DerefOf(Index(TEMP, 0x12)), BB12)\n
Store (DerefOf(Index(TEMP, 0x13)), BB13)\n
Store (DerefOf(Index(TEMP, 0x14)), BB14)\n
Store (DerefOf(Index(TEMP, 0x15)), BB15)\n
Store (DerefOf(Index(TEMP, 0x16)), BB16)\n
Store (DerefOf(Index(TEMP, 0x17)), BB17)\n
Store (DerefOf(Index(TEMP, 0x18)), BB18)\n
Store (DerefOf(Index(TEMP, 0x19)), BB19)\n
Store (DerefOf(Index(TEMP, 0x1A)), BB1A)\n
Store (DerefOf(Index(TEMP, 0x1B)), BB1B)\n
Store (DerefOf(Index(TEMP, 0x1C)), BB1C)\n
Store (DerefOf(Index(TEMP, 0x1D)), BB1D)\n
Store (DerefOf(Index(TEMP, 0x1E)), BB1E)\n
Store (DerefOf(Index(TEMP, 0x1F)), BB1F)\n
}\n
end;
into device label EC0 code_regex BDA2,\s+256 replace_matched
begin
//BDA2, 256,\n
BB00,8,BB01,8,BB02,8,BB03,8,\n
BB04,8,BB05,8,BB06,8,BB07,8,\n
BB08,8,BB09,8,BB0A,8,BB0B,8,\n
BB0C,8,BB0D,8,BB0E,8,BB0F,8,\n
BB10,8,BB11,8,BB12,8,BB13,8,\n
BB14,8,BB15,8,BB16,8,BB17,8,\n
BB18,8,BB19,8,BB1A,8,BB1B,8,\n
BB1C,8,BB1D,8,BB1E,8,BB1F,8\n
end;
into method label SMBR code_regex \(BDA2, replaceall_matched begin (RDBB(), end;
into method label SMBR code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end;
into method label SMBW code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end;
into method label ECSB code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end;
into method label ECSB code_regex \(BDA2, replaceall_matched begin (RDBB(), end;
# additional work for _BIX method present in some ASUS laptops
into device label EC0 code_regex B0C3,\s+16 replace_matched begin XC30,8,XC31,8 end;
into device label EC0 code_regex B1C3,\s+16 replace_matched begin YC30,8,YC31,8 end;
into_all method label _BIX code_regex \(\^\^LPCB\.EC0\.B0C3, replaceall_matched begin (B1B2(^^LPCB.EC0.XC30,^^LPCB.EC0.XC31), end;
into_all method label _BIX code_regex \(\^\^LPCB\.EC0\.B1C3, replaceall_matched begin (B1B2(^^LPCB.EC0.YC30,^^LPCB.EC0.YC31), end;
# or could remove the _BIX method if it turns out not to work
#into_all method label _BIX remove_entry;
#fix logic error in some newer ASUS DSDTs (issue #23)
into method label FBST code_regex If\s\(CHGS\s\(Zero\)\)[\s]+\{[\s]+Store\s\(0x02,\sLocal0\)[\s]+\}[\s]+Else[\s]+\{[\s]+Store\s\(One,\sLocal0\)[\s]+\} replaceall_matched
begin
If (CHGS (Zero))\n
{\n
Store (0x02, Local0)\n
}\n
Else\n
{\n
Store (Zero, Local0)\n
}
end;
无线网卡AR9285，在DSDT中加入以下代码即可使用：
into method label _DSM parent_label WLAN remove_entry;
into device label WLAN parent_label RP02 insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n
Return (Package()\n
{\n
"device-id", Buffer() { 0x30, 0x00, 0x00, 0x00 },\n
"name", "pci168c,30",\n
"AAPL,slot-name", Buffer() { "AirPort" },\n
"device_type", Buffer() { "AirPort" },\n
"model", Buffer() { "Atheros 9285 802.11 b/g/n Wireless Network Adapter" },\n
"subsystem-id", Buffer() { 0x8F, 0x00, 0x00, 0x00 },\n
"subsystem-vendor-id", Buffer() { 0x6B, 0x10, 0x00, 0x00 },\n
})\n
}\n
end;
注：DSDT中添加代码请使用MaciASL的Patch
|
