z170+i7 6700k+gtx970 Clover引导记录，还有些问题求大神点评

wwwsu

目前主要的问题：1、双显不能同时使用，必须先生一台显示器启动成功后还能接入另一台显示器。一接双显就自动重启；
2、usb2.0没有驱动；

3、声卡没有驱动。

附上启动记录及config.plist求大神指点





0:100  0:100  MemLog inited, TSC freq: 4008555770
0:100  0:000  MemLog was calibrated without ACPI PM Timer: ACPI I/O space is not enabled.
0:100  0:000  
0:100  0:000  Now is 2.3.2016,  1:55:0 (GMT+2047)
0:100  0:000  Starting Clover rev 3346 on American Megatrends EFI
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,37712DBF-6045-481F-A9FD-D8702963B8BA,0x28,0x64000) @82861A98
0:100  0:000  SelfDirPath = \EFI\BOOT
0:101  0:001  Total Memory Slots Count = 4
0:101  0:000  Type 17 Index = 0
0:101  0:000  SmbiosTable.Type17->Speed = 2133MHz
0:101  0:000  SmbiosTable.Type17->Size = 8192MB
0:101  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM1
0:101  0:000  Type 17 Index = 1
0:101  0:000  SmbiosTable.Type17->Speed = 2133MHz
0:101  0:000  SmbiosTable.Type17->Size = 8192MB
0:101  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM2
0:101  0:000  Type 17 Index = 2
0:101  0:000  SmbiosTable.Type17->Speed = 2133MHz
0:101  0:000  SmbiosTable.Type17->Size = 8192MB
0:101  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM1
0:101  0:000  Type 17 Index = 3
0:101  0:000  SmbiosTable.Type17->Speed = 2133MHz
0:101  0:000  SmbiosTable.Type17->Size = 8192MB
0:101  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM2
0:101  0:000  Boot status=0
0:101  0:000  Clover revision: 3346  running on System Product Name
0:101  0:000  ... with board Z170-AR
0:101  0:000  CPU Vendor = 756E6547 Model=506E3
0:101  0:000  The CPU supported turbo
0:101  0:000  BrandString = Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz
0:101  0:000  MSR 0xE2 before patch 1E000000
0:101  0:000  MSR 0xE4              00031814
0:101  0:000  MSR 0xCE              00080838_F1012800
0:101  0:000  non-usable FLEX_RATIO = F0000
0:101  0:000  corrected FLEX_RATIO = E0000
0:101  0:000  MSR 0x1B0             00000000
0:101  0:000  FSBFrequency=100MHz DMIvalue=100000kHz
0:101  0:000  Corrected FSBFrequency=100MHz
0:101  0:000  Vendor/Model/Stepping: 0x756E6547/0x5E/0x3
0:101  0:000  Family/ExtFamily: 0x6/0x0
0:101  0:000  MaxDiv/MinDiv: 40.0/8
0:101  0:000  Turbo: 40/40/40/42
0:101  0:000  Features: 0xBFEBFBFF
0:101  0:000  Threads: 8
0:101  0:000  Cores: 4
0:101  0:000  FSB: 100 MHz
0:101  0:000  CPU: 4000 MHz
0:101  0:000  TSC: 4000 MHz
0:101  0:000  PIS: 400 MHz
0:101  0:000  PCI (00|00:00.00) : 8086 191F class=060000
0:101  0:000  PCI (00|00:01.00) : 8086 1901 class=060400
0:101  0:000  PCI (00|01:00.00) : 10DE 13C2 class=030000
0:101  0:000  Found NVidia model=Asus GeForce GTX 970
0:101  0:000  PCI (00|01:00.01) : 10DE 0FBB class=040300
0:101  0:000  PCI (00|00:14.00) : 8086 A12F class=0C0330
0:101  0:000  PCI (00|00:16.00) : 8086 A13A class=078000
0:101  0:000  PCI (00|00:17.00) : 8086 A102 class=010601
0:101  0:000  PCI (00|00:1B.00) : 8086 A167 class=060400
0:101  0:000  PCI (00|00:1C.00) : 8086 A110 class=060400
0:101  0:000  PCI (00|03:00.00) : 1B21 1242 class=0C0330
0:101  0:000  PCI (00|00:1C.02) : 8086 A112 class=060400
0:101  0:000  PCI (00|04:00.00) : 1B21 1080 class=060400
0:101  0:000  PCI (00|00:1D.00) : 8086 A118 class=060400
0:101  0:000  PCI (00|00:1F.00) : 8086 A145 class=060100
0:101  0:000  PCI (00|00:1F.02) : 8086 A121 class=058000
0:101  0:000  PCI (00|00:1F.03) : 8086 A170 class=040300
0:102  0:000  PCI (00|00:1F.04) : 8086 A123 class=0C0500
0:102  0:000  PCI (00|00:1F.06) : 8086 15B8 class=020000
0:102  0:000  LAN 0, Vendor=8086, MMIO=DF200000
0:102  0:000  Clover load options size = 0 bytes
0:105  0:003  Using OEM config.plist at path: EFI\CLOVER\config.plist
0:105  0:000  EFI\CLOVER\config.plist loaded: Success
0:105  0:000  Found theme directory: embedded
0:105  0:000  Found theme directory: ios7
0:108  0:002  Found theme directory: random
0:108  0:000  Loading early settings
0:108  0:000  timeout set to 3
0:108  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:108  0:000  KextsToPatch: 5 requested
0:108  0:000  KextsToPatch 0: AppleUSBXHCIPCI (change 15 port limit to 30 in XHCI kext (100-series)) Kext bin patch, data len: 7
0:108  0:000  KextsToPatch 1: IOAHCIBlockStorage (TRIM) Kext bin patch, data len: 10
0:108  0:000  KextsToPatch 2: AppleGraphicsDevicePolicy (AppleGraphicsDevicePolicy (board-id) Patch (c) Pike R. Alpha) Kext bin patch, data len: 8
0:108  0:000  KextsToPatch 3: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8
0:108  0:000  KextsToPatch 4: AppleAPIC (Skylake AppleAPIC Patch (c) Pike R. Alpha) Kext bin patch, data len: 6
0:108  0:000  Default theme: ios7
0:108  0:000  Hiding entries with string \EFI\BOOT\BOOTX64.EFI
0:108  0:000  Hiding entries with string Windows
0:108  0:000  LoadDrivers() start
0:108  0:000  Loading DataHubDxe-64.efi  status=Success
0:112  0:003  Loading OsxAptioFix2Drv-64.efi  status=Success
0:112  0:000  Loading OsxFatBinaryDrv-64.efi  status=Success
0:112  0:000  Loading PartitionDxe-64.efi  status=Success
0:113  0:000   - driver needs connecting
0:113  0:000  Loading VBoxHfs-64.efi  status=Success
0:113  0:000   - driver needs connecting
0:113  0:000  2 drivers needs connecting ...
0:113  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:113  0:000  Partition driver loaded:
0:113  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:716  0:602  LoadDrivers() end
0:716  0:000  Dump SMC keys from NVRAM:
0:723  0:007  SetScreenResolution: 1920x1080 - already set
0:723  0:000  Console modes reported: 4, available modes:
0:723  0:000    Mode 1: 80x25 (current mode)
0:723  0:000    Mode 2: 80x50
0:723  0:000    Mode 3: 100x31
0:723  0:000    Mode 4: 240x56
0:723  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,37712DBF-6045-481F-A9FD-D8702963B8BA,0x28,0x64000)
0:724  0:000  ScanSPD() start
0:724  0:000  SMBus CmdReg: 0x3
0:724  0:000  Scanning SMBus [8086:A123], mmio: 0xDF24A004, ioport: 0xF000, hostc: 0x11
0:724  0:000  Slots to scan [8]...
0:738  0:013  SPD[0]: Type 0 @0x50
0:752  0:013  SPD[1]: Type 0 @0x51
0:766  0:014  SPD[2]: Type 0 @0x52
0:780  0:014  SPD[3]: Type 0 @0x53
0:804  0:024  ScanSPD() end
0:804  0:000  Get Acpi Tables List from RSDT:
0:804  0:000   Found table: FACP  A M I  len=132
0:804  0:000   Found table: APIC  A M I  len=188
0:804  0:000   Found table: FPDT  A M I  len=68
0:804  0:000   Found table: FIDT  A M I  len=156
0:804  0:000   Found table: MCFG  A M I len=60
0:804  0:000   Found table: HPET  A M I len=56
0:804  0:000   Found table: SSDT  SataTabl len=877
0:804  0:000   Found table: LPIT  SKL len=148
0:804  0:000   Found table: SSDT  sensrhub len=584
0:804  0:000   Found table: SSDT  PtidDevc len=11182
0:804  0:000   Found table: SSDT  Ther_Rvp len=3141
0:804  0:000   Found table: DBGP   len=52
0:804  0:000   Found table: DBG2   len=84
0:804  0:000   Found table: SSDT  xh_rvp08 len=1789
0:804  0:000   Found table: SSDT  SaSsdt  len=21105
0:804  0:000   Found table: UEFI   len=66
0:804  0:000   Found table: SSDT  CpuSsdt len=3672
0:804  0:000   Found table: DMAR  SKL  len=120
0:804  0:000   Found table: BGRT  A M I  len=56
0:804  0:000  Calibrated TSC frequency =4008555770 =4008MHz
0:804  0:000  Loading main settings
0:804  0:000  USB FixOwnership: true
0:807  0:002  found 8 volumes with blockIO
0:807  0:000   0. Volume:
0:807  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)
0:807  0:000    Result of bootcode detection: bootable unknown (legacy)
0:807  0:000   1. Volume:
0:807  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(1,MBR,0xB0CD0991,0x800,0xFA000)
0:808  0:000    Result of bootcode detection: bootable Windows (vista,win)
0:810  0:002   2. Volume:
0:810  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(2,MBR,0xB0CD0991,0xFA800,0x621B800)
0:811  0:000    Result of bootcode detection: bootable Windows (vista,win)
0:814  0:002   3. Volume:
0:814  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(3,MBR,0xB0CD0991,0x6316000,0x31B2C000)
0:814  0:000    Result of bootcode detection: bootable Windows (vista,win)
0:817  0:002   4. Volume:
0:817  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)
0:817  0:000   5. Volume:
0:817  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,37712DBF-6045-481F-A9FD-D8702963B8BA,0x28,0x64000)
0:818  0:000    Result of bootcode detection: bootable unknown (legacy)
0:818  0:000    This is SelfVolume !!
0:818  0:000   6. Volume:
0:818  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,04E5A3F0-4E11-46B0-A556-59D7AC66D1CA,0x64028,0xDDFAC40)
0:819  0:000   7. Volume:
0:819  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(3,GPT,089728A9-4471-4EF1-AAA4-EC365584E734,0xDE5EC68,0x135F20)
0:819  0:000  Using theme 'ios7' (EFI\CLOVER\themes\ios7)
0:819  0:000  OS main and drive as badge
0:820  0:000  Choosing theme ios7
0:820  0:000  Custom entries start
0:820  0:000  Custom entries finish
0:820  0:000  Scanning loaders...
0:820  0:000   0: 'Whole Disc Boot' no file system
0:820  0:000   1: 'ûßYY'
0:827  0:006   2: 'Window10'
0:832  0:004   3: 'Soft'
0:836  0:004   4: 'Whole Disc Boot' no file system
0:836  0:000   5: 'EFI'
0:853  0:016   6: 'OS X EI Capitan'
0:863  0:010      AddLoaderEntry for Volume Name=OS X EI Capitan
0:869  0:005      Check if volume Is Hibernated:
0:869  0:000      Check sleep image 'by signature':
0:876  0:007      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found
0:876  0:000      using default sleep image name = \private\var\vm\sleepimage
0:882  0:005      Reading first 512 bytes of sleepimage ...
0:883  0:000   OurBlockIoRead: Lba=722F338, Offset=E45E67000 (BlockSize=512)
0:883  0:000   sig lion: 0
0:883  0:000   sig snow: 0
0:883  0:000   no valid sleep image offset was found
0:883  0:000      Reading completed -> Success
0:883  0:000       sleepimage offset could not be acquired
0:883  0:000       hibernated: no - sign
0:891  0:008   7: 'Recovery HD'
0:892  0:001      AddLoaderEntry for Volume Name=Recovery HD
0:899  0:006  Custom legacy start
0:899  0:000  Custom legacy end
0:899  0:000  Scanning legacy ...
0:899  0:000   0: 'Whole Disc Boot' (legacy) not legacy
0:899  0:000   1: 'ûßYY' (vista,win) add legacy
0:899  0:000   added 'Boot Windows from ûßYY' OSType=2 Icon=vista,win
0:899  0:000   2: 'Window10' (vista,win) add legacy
0:900  0:000   added 'Boot Windows from Window10' OSType=2 Icon=vista,win
0:900  0:000   3: 'Soft' (vista,win) add legacy
0:900  0:000   added 'Boot Windows from Soft' OSType=2 Icon=vista,win
0:900  0:000   4: 'Whole Disc Boot' (legacy) not legacy
0:900  0:000   5: 'EFI' (legacy) not legacy
0:900  0:000   6: 'OS X EI Capitan' (legacy) not legacy
0:900  0:000   7: 'Recovery HD' (legacy) not legacy
0:900  0:000  Custom tool start
0:900  0:000  Custom tool end
0:901  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
0:901  0:000  Checking EFI partition Volume 5 for Clover
0:901  0:000   Found Clover
0:902  0:000  GetEfiBootDeviceFromNvram: efi-boot-device-data not found
0:902  0:000  EfiBootVolume not found
0:902  0:000  Default boot entry not found
0:902  0:000  DefaultIndex=-1 and MainMenu.EntryCount=11
1:146  0:244  Found Mouse device:
1:146  0:000  GUI ready
2:163  1:016  Boot option Boot0000 not found
2:163  0:000  StartLoader() start
2:163  0:000  Entry->Settings: <null string>
2:163  0:000  Finally: Bus=100213kHz CPU=4009MHz
2:163  0:000  Kernel and Kext Patches at 7D82B4B0:
2:163  0:000          Allowed: y
2:163  0:000          Debug: n
2:163  0:000          KernelCpu: n
2:163  0:000          Lapic: n
2:163  0:000          Haswell-E: n
2:163  0:000          AICPUPM: y
2:163  0:000          AppleRTC: y
2:163  0:000          KernelPm: y
2:163  0:000          FakeCPUID: 0x0
2:163  0:000          ATIController: null
2:163  0:000          ATIDataLength: 0
2:163  0:000          0 Kexts to load
2:163  0:000          5 Kexts to patch
2:163  0:000            KextPatch[0]: 7 bytes, AppleUSBXHCIPCI
2:163  0:000            KextPatch[1]: 10 bytes, IOAHCIBlockStorage
2:163  0:000            KextPatch[2]: 8 bytes, AppleGraphicsDevicePolicy
2:163  0:000            KextPatch[3]: 8 bytes, AppleAHCIPort
2:163  0:000            KextPatch[4]: 6 bytes, AppleAPIC
2:163  0:000  Loading boot.efi  status=Success
2:309  0:145  GetOSVersion: : 10.11.3
2:309  0:000  insert table 9 for dev 0:0
2:309  0:000  insert table 9 for dev 0:1
2:309  0:000  insert table 9 for dev 1F:6
2:309  0:000  Trusting SMBIOS...
2:309  0:000  Detected alternating SMBIOS channel banks
2:309  0:000  Channels: 4
2:309  0:000  Interleave: 0 2 4 6 1 3 5 7 8 10 12 14 9 11 13 15 16 18 20 22 17 19 21 23
2:309  0:000   partNum=KHX2133C14D4/8G     
2:309  0:000  SMBIOS Type 17 Index = 0 => 0 0:
2:309  0:000  BANK0 DIMM0 2133MHz 8192MB
2:309  0:000  mTotalSystemMemory = 8192
2:309  0:000   partNum=KHX2133C14D4/8G     
2:309  0:000  SMBIOS Type 17 Index = 1 => 1 2:
2:309  0:000  BANK1 DIMM0 2133MHz 8192MB
2:309  0:000  mTotalSystemMemory = 16384
2:309  0:000   partNum=KHX2133C14D4/8G     
2:309  0:000  SMBIOS Type 17 Index = 2 => 2 4:
2:309  0:000  BANK2 DIMM0 2133MHz 8192MB
2:309  0:000  mTotalSystemMemory = 24576
2:309  0:000   partNum=KHX2133C14D4/8G     
2:309  0:000  SMBIOS Type 17 Index = 3 => 3 6:
2:309  0:000  BANK3 DIMM0 2133MHz 8192MB
2:309  0:000  mTotalSystemMemory = 32768
2:309  0:000  NumberOfMemoryDevices = 4
2:309  0:000  Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000
2:309  0:000  Type20[1]->End = 0x17FFFFF, Type17[2] = 0x8000
2:309  0:000  Type20[2]->End = 0xFFFFFF, Type17[1] = 0xC000
2:309  0:000  Type20[3]->End = 0x1FFFFFF, Type17[3] = 0x14000
2:309  0:000  Table 131 is present, CPUType=31
2:309  0:000  Change to: 706
2:309  0:000  RSDT 0x86859028
2:309  0:000  FADT from RSDT: 0x86859170
2:309  0:000  XSDT 0x868590A0
2:309  0:000  FADT from XSDT: 0x8687C050
2:309  0:000  Xsdt reallocation done
2:309  0:000  old FADT length=10C
2:309  0:000  Apply DsdtFixMask=0x00000000 old way
2:309  0:000     drop _DSM mask=0x0000
2:309  0:000  ========= Auto patch DSDT Starting ========
2:309  0:000  VideoCard devID=0x13C210DE
2:309  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
2:309  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
2:309  0:000  USBADR[1] = 0x1C0000 and PCIe = 0x0
2:310  0:000  first CPU found at 8F1A offset 8F1D
2:310  0:000  score candidate at 8F16
2:310  0:000  score inserted in acpi_cpu_score _PR_
2:310  0:000  Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7
  within the score: _PR_
2:310  0:000  Found PCIROOTUID = 0
2:310  0:000  ========= Auto patch DSDT Finished ========
2:310  0:000  Patch table: SSDT  SataTabl
2:310  0:000   SSDT len = 0x36D
2:310  0:000  Patch table: SSDT  sensrhub
2:310  0:000   SSDT len = 0x248
2:310  0:000  Patch table: SSDT  PtidDevc
2:310  0:000   SSDT len = 0x2BAE
2:310  0:000  Patch table: SSDT  Ther_Rvp
2:310  0:000   SSDT len = 0xC45
2:310  0:000  Patch table: SSDT  xh_rvp08
2:310  0:000   SSDT len = 0x6FD
2:310  0:000  Patch table: SSDT  SaSsdt
2:310  0:000   SSDT len = 0x5271
2:310  0:000  Patch table: SSDT  CpuSsdt
2:310  0:000   SSDT len = 0xE58
2:310  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
2:310  0:000   Xsdt has tables count=19
2:310  0:000  corrected XSDT length=188
2:310  0:000  Inserting SSDT.aml from EFI\CLOVER\ACPI\patched ... Success
2:312  0:002   CPUBase=0 and ApicCPUBase=1 ApicCPUNum=1
2:312  0:000  EdidDiscovered size=128
2:312  0:000  00 | 00 FF FF FF FF FF FF 00 05 E3 81 22 EF 00 00 00
2:312  0:000  16 | 23 19 01 03 80 30 1B 78 2A 5A 65 A7 56 52 9C 27
2:312  0:000  32 | 0F 50 54 BF EF 00 D1 C0 B3 00 95 00 81 80 81 40
2:312  0:000  48 | 81 C0 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C
2:312  0:000  64 | 45 00 DC 0C 11 00 00 1E 00 00 00 FD 00 32 4C 1E
2:312  0:000  80 | 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 32
2:312  0:000  96 | 32 38 31 57 0A 20 20 20 20 20 20 20 00 00 00 FF
2:312  0:000  112 | 00 41 46 50 46 38 39 41 30 30 30 32 33 39 01 35
2:312  0:000  NVidia GFX injection not set
2:312  0:000   RCBA disabled; cannot use it
2:312  0:000  HDA Controller [8086:A170] :: PciRoot(0x0)\Pci(0x1F,0x3) => detected codec: 10EC:0892
2:313  0:000  LAN Controller [8086:15B8] :: PciRoot(0x0)\Pci(0x1F,0x6)
2:313  0:000  stringlength = 476
2:313  0:000  CurrentMode: Width=1920 Height=1080
2:313  0:000  Beginning FSInjection
2:313  0:000   - ERROR: gFSInjectProtocolGuid not found!
2:317  0:004  MSR 0x1B0   set to        00000000
2:317  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
2:317  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.11
2:317  0:000    Extra kext: EFI\CLOVER\kexts\10.11\IntelMausiEthernet.kext
2:321  0:003    Extra kext: EFI\CLOVER\kexts\10.11\NullCPUPowerManagement.kext
2:322  0:001    Extra kext: EFI\CLOVER\kexts\10.11\FakeSMC.kext
2:326  0:003  Removed efi-boot-device-data variable: Not Found
2:326  0:000  Custom boot screen not used because entry has unset use graphics
2:326  0:000  Closing log

wwwsu

请大神看看

bjl123334

求个可用的config.plist  i5 6500 技嘉b150d3h

royliuforever

bjl123334 发表于 2016-3-5 13:08
求个可用的config.plist  i5 6500 技嘉b150d3h

同求。

Bonnovel

同求，我的双显只有DVI口的亮，楼主如果解决了，麻烦告知办法，大谢

wwwsu

双显还快没有搞定

a5636916

哎小白 看那些Clover教程怎么学啊- - 都不知道什么作用

yishiwen

我的配置跟你一样，求个EFi，折腾了好几天总是不行，

rongrong1145

可以安装么？我试试？

rongrong1145

试过你的CONG.LIST。。还是不行‘

rongrong1145

能不能把过程写出来？

lovezhiqi123

楼主双显解决没？

wwwsu

lovezhiqi123 发表于 2016-6-1 07:35
楼主双显解决没？

重启几次就自己好了

lainuokeji

多谢分享，下载试试.....

o雪拉比o

你这个能用吗