这样的配置CLOVER安装MAC黑屏！

mrmg

一看就是bios设置问题。

1. To access BIOS/UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up
2. Load Optimized Defaults
3. If your CPU supports VT-d, disable it
4. If your system has CFG-Lock, disable it
5. If your system has Secure Boot Mode, disable it
6. Set OS Type to Other OS
7. If your system has IO SerialPort, disable it
8. Set XHCI Handoff to Enabled
9. If you have a 6 series or x58 system with AWARD BIOS, disable USB 3.0
10. Save and exit.
以上参考
还有，必须关闭cms。

mrmg

没鼠标，加voodoo试试

nbsniper

CFG-Lock希望早日解决

aaabbb88

ae66 发表于 2017-7-25 14:05
多谢楼上各位，看了li1991000 的回复，开机后进BIOS，把BIOS给复位了，然后开启几ACHI和UEFI，居然看见启动 ...

你对比过是哪些Bios设置不对，重新设置呢？我现在也遇到这个问题