10.13.2 clove 启动安装自动重启

caohong

主要配置：
主板：Intel DQ77BK
CPU：I5 3475S
显卡：HD4000
无线：BCM94360CS2
os及clover版本：
官网下载10.12.6和10.13.2自制U盘，clover r4297 及4359等版本 ，自行提取apfs.efi放入drivers64UEFI
相同clover配置可全新正常安装10.12.6并正常使用，但安装10.13.2选择安装启动后不久便自动重启无法完成安装。请各路大侠指点思路如何解决，在此谢过~~~~~~~
备注：同一个u盘配置，可在我的大奶上Z87X-UD3H I5 4570上能正常顺利安装使用10.13.2
附上preboot.log供大侠参详。（字节闲置贴纸中只贴了后面部分）
0:100  0:100  MemLog inited, TSC freq: 2893428238
0:100  0:000  
0:100  0:000  Now is 10.1.2018,  15:32:38 (GMT)
0:100  0:000  Starting Clover revision: 4297 on American Megatrends EFI
0:100  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE5 | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.6 | XCODE: 9.1]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x14,0x0)\USB(0x8,0x0)\HD(1,MBR,0x004DF650,0x2000,0x20C000) @D837D098
0:100  0:000  SelfDirPath = \EFI\BOOT
0:101  0:001  === [ Get Smbios ] ========================================
0:101  0:000  Type 16 Index = 0
0:101  0:000  Total Memory Slots Count = 2
0:101  0:000  Type 17 Index = 0
0:101  0:000  Ignoring insane frequency value 0MHz
0:101  0:000  SmbiosTable.Type17->Speed = 0MHz
0:101  0:000  SmbiosTable.Type17->Size = 0MB
0:101  0:000  SmbiosTable.Type17->Bank/Device = CHANNEL A SLOT 0 SODIMM 1
0:101  0:000  SmbiosTable.Type17->Vendor = <null string>
0:101  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:101  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:101  0:000  Type 17 Index = 1
0:101  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:101  0:000  SmbiosTable.Type17->Size = 4096MB
0:101  0:000  SmbiosTable.Type17->Bank/Device = CHANNEL B SLOT 0 SODIMM 2
0:101  0:000  SmbiosTable.Type17->Vendor = Kingston
0:101  0:000  SmbiosTable.Type17->SerialNumber = 6B05BD4D
0:101  0:000  SmbiosTable.Type17->PartNumber = 99U5428-046.A00LF
0:101  0:000  Boot status=0
0:101  0:000  Running on: ' ' with board 'DQ77KB'
0:101  0:000  === [ GetCPUProperties ] ==================================
0:101  0:000  CPU Vendor = 756E6547 Model=306A9
0:101  0:000   The CPU supported SSE4.1
0:101  0:000  BrandString = Intel(R) Core(TM) i5-3475S CPU @ 2.90GHz
0:101  0:000   The CPU supported turbo
0:101  0:000  MSR 0x35               40004
0:101  0:000  MSR 0xE2 before patch 1E008402
0:101  0:000  MSR 0xE2 is locked, PM patches will be turned on
0:101  0:000  MSR 0xCE              00081010_E0011D00
0:101  0:000  MSR 0x1A0             00850089
0:101  0:000  corrected FLEX_RATIO = 180000
0:101  0:000  MSR 0x1B0             00000000
0:101  0:000  FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:101  0:000  MaxDiv/MinDiv: 29.0/16
0:101  0:000  Turbo: 32/33/35/36
0:101  0:000  Features: 0xBFEBFBFF
0:101  0:000  Threads: 4
0:101  0:000  Cores: 4
0:101  0:000  FSB: 100 MHz
0:101  0:000  CPU: 2900 MHz
0:101  0:000  TSC: 2900 MHz
0:101  0:000  PIS: 100 MHz
0:101  0:000  ExternalClock: 25 MHz
0:101  0:000  === [ GetDevices ] ========================================
0:101  0:000  PCI (00|00:00.00) : 8086 0150 class=060000
0:101  0:000  PCI (00|00:02.00) : 8086 0162 class=030000
0:101  0:000   - GFX: Model=Intel HD Graphics 4000 (Intel)
0:101  0:000  PCI (00|00:14.00) : 8086 1E31 class=0C0330
0:101  0:000  PCI (00|00:16.00) : 8086 1E3A class=078000
0:101  0:000  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
0:101  0:000  PCI (00|00:16.03) : 8086 1E3D class=070002
0:101  0:000  PCI (00|00:19.00) : 8086 1502 class=020000
0:101  0:000   - LAN: 0 Vendor=Intel
0:101  0:000  PCI (00|00:1A.00) : 8086 1E2D class=0C0320
0:101  0:000  PCI (00|00:1B.00) : 8086 1E20 class=040300
0:101  0:000  PCI (00|00:1C.00) : 8086 1E10 class=060400
0:101  0:000  PCI (00|01:00.00) : 14E4 43A0 class=028000
0:101  0:000   - WIFI: Vendor=Broadcom
0:101  0:000  PCI (00|00:1C.06) : 8086 1E1C class=060400
0:101  0:000  PCI (00|02:00.00) : 8086 10D3 class=020000
0:101  0:000   - LAN: 1 Vendor=Intel
0:102  0:000  PCI (00|00:1D.00) : 8086 1E26 class=0C0320
0:102  0:000  PCI (00|00:1E.00) : 8086 244E class=060401
0:102  0:000  PCI (00|00:1F.00) : 8086 1E47 class=060100
0:102  0:000  PCI (00|00:1F.02) : 8086 1E02 class=010601
0:102  0:000  PCI (00|00:1F.03) : 8086 1E22 class=0C0500
0:102  0:000  PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF
。。。。。。。。。。。。。

105:808  0:016  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.13
105:808  0:000  Extra kext: EFI\CLOVER\kexts\10.13\Lilu.kext
105:810  0:001  Failed to load extra kext (Info.plist not found): EFI\CLOVER\kexts\10.13\Lilu.kext
105:810  0:000  Extra kext: EFI\CLOVER\kexts\10.13\FakeSMC.kext
105:830  0:020  Extra kext: EFI\CLOVER\kexts\10.13\AppleIntelE1000e.kext
105:830  0:000  Failed to load extra kext (Info.plist not found): EFI\CLOVER\kexts\10.13\AppleIntelE1000e.kext
105:830  0:000  Extra kext: EFI\CLOVER\kexts\10.13\AppleALC.kext
105:830  0:000  Failed to load extra kext (Info.plist not found): EFI\CLOVER\kexts\10.13\AppleALC.kext
105:830  0:000    |-- PlugIn kext: EFI\CLOVER\kexts\10.13\AppleALC.kext\Contents\PlugIns\PinConfigs.kext
105:830  0:000  Failed to load extra kext (Info.plist not found): EFI\CLOVER\kexts\10.13\AppleALC.kext\Contents\PlugIns\PinConfigs.kext
105:830  0:000  Extra kext: EFI\CLOVER\kexts\10.13\IntelMausiEthernet.kext
105:842  0:011  Extra kext: EFI\CLOVER\kexts\10.13\FakeSMC.kext
105:861  0:019  Custom boot screen not used because entry has unset use graphics
105:862  0:000  Closing log

loyalty_hao

只留必要驱动，再逐一排查