【网卡驱动】博通有线网卡驱动新版BCM5722D.kext 2.3.6（2018-01-20）

15732157027

该驱动搬运自insanelymac论坛，驱动已经更新到2.3.6版本,硬件为博通有线网卡的，需要的朋友可以取用。具体支持型号如下：

1. { DEVICEID_BCM5722, "BCM5722 NetXtreme Server Gigabit Ethernet" },
   
2. { DEVICEID_BCM5754, "BCM5754 NetXtreme Gigabit Ethernet" },
   
3. { DEVICEID_BCM5754M, "BCM5754M NetXtreme Gigabit Ethernet" },
   
4. { DEVICEID_BCM5755, "BCM5755 NetXtreme Gigabit Ethernet" },
   
5. { DEVICEID_BCM5755M, "BCM5755M NetXtreme Gigabit Ethernet" },
   
6. { DEVICEID_BCM5787, "BCM5787 NetLink (TM) Gigabit Ethernet" },
   
7. { DEVICEID_BCM5787M, "BCM5787M NetLink (TM) Gigabit Ethernet" },
   
8. { DEVICEID_BCM5906, "BCM5906 NetLink (TM) Fast Ethernet" },
   
9. { DEVICEID_BCM5906M, "BCM5906M NetLink (TM) Fast Ethernet" },
   
10. { DEVICEID_BCM57788, "BCM57788 NetLink (TM) Gigabit Ethernet" },
    
11. { DEVICEID_BCM5784, "BCM5784 NetLink Gigabit Ethernet" },
    
12. { DEVICEID_BCM57785, "BCM57785 NetLink (TM) Gigabit Ethernet" },
    
13. { DEVICEID_BCM57781, "BCM57781 NetLink (TM) Gigabit Ethernet" },
    
14. { DEVICEID_BCM57780, "BCM57780 NetLink (TM) Gigabit Ethernet" },
    
15. { DEVICEID_BCM5752, "BCM5752 NetLink (TM) Gigabit Ethernet" },
    
16. { DEVICEID_BCM5761, "BCM5761 NetLink (TM) Gigabit Ethernet" },
    
17. { DEVICEID_BCM5761E, "BCM5761E NetLink (TM) Gigabit Ethernet" },

复制代码

版本更新日志如下（2.3.6解决了该驱动带来的唤醒问题）：

1. What's New in Version 2.3.6 (See full changelog)
   
2. v2.0 problem with stoping during an intense traffic was solved
   
3. v2.1 Corrected four warnings. Now the code is clean.
   
4. v2.2 Added more devices. Now driver supports 13 devices
   
5. v2.3 fixed problem in Xcode that had impeded to compline it for x32 machines.
   
6. Added supporting for Snow_Leopard.
   
7. v2.3.1 added support of BCM5752
   
8. v2.3.2 added support of BCM5761
   
9. ver 2.3.3
   
10. Added support of BCM5761E
    
11. Improved resistance against cessation of driver
    
12. v2.3.4 big improvement. IOBasicOutputQueue outputPacket() synchronized to the work loop. Fix fails replaceOrCopyPacket() when it prepares the descriptor for reuse with the old buffer (mbuf). It's credit of Mieze
    
13. v2.3.5 solved reboot problem which had some users. Solved problem with unplugged cable where was incorrect status.
    
14. v2.3.6 Fixed the wakeup bug (I think). Only tested on a D630 and a Precison M4300 so far.

复制代码

15732157027

二楼备用

kidddjh

人工置顶

yong83220

谢谢分享。。。

q455801692

谢谢分享！！！！！！！！！！！！！

applelife

不错不错不错

cxlzc011

可以可以受教了

brace5

非常感谢，正在寻找

liangjitianya

感谢分享，谢谢

Ldong68

谢谢分享，谢谢！

ajw333

4327 支持不？

左右流之

谢谢分享，下载试试。

william0320

感谢版主分享，支持

zymwmm

谢谢分享。。。

svipxp

感谢楼主分享

hetenbin

谢谢分享！！！！

blackther

请问这个驱动怎么用啊？

hetenbin

谢谢分享！！！！

hetenbin

谢谢分享！！！！

binshaoye

谢谢，正需要的