- 积分
- 352
- 最后登录
- 2024-3-14
- 精华
- 0
- 阅读权限
- 30
- 主题
- 85
- UID
- 1170755
- 帖子
- 804
- PB币
- 320
- 威望
- 5
- 贡献
- 0
- 技术
- 9
- 活跃
- 1568
- UID
- 1170755
- 帖子
- 804
- PB币
- 320
- 贡献
- 0
- 技术
- 9
- 活跃
- 1568
|
板凳
发表于 2022-2-20 13:13:21
IP属地上海
|只看该作者
本帖最后由 xrm857517669 于 2022-3-13 19:29 编辑
2022/02/20已知问题:
1.睡眠秒醒2.使用cputopologyrebuild.kext后处理器显示未知
睡眠唤醒相关日志:
- 2022-02-20 13:41:08.341605+0800 0x382 Default 0x0 150 0 bluetoothd: [com.apple.bluetooth:Server.HID] HIDProfile::prepareForSleep() -- Sending setReport via enqueueUserSpaceHIDDataForDevice for Clear Wake Reason for device B1191361
- 2022-02-20 13:41:08.376701+0800 0x382 Default 0x0 150 0 bluetoothd: [com.apple.bluetooth:Server.HID] HIDProfile::prepareForSleep() -- Sending setReport via enqueueUserSpaceHIDDataForDevice for Clear Wake Reason for device B38A6E79
- 2022-02-20 13:41:10.331817+0800 0x849 Default 0x0 0 0 kernel: (AppleTopCaseHIDEventDriver) [HID] [ATC] [Error] AppleDeviceManagementHIDEventService::setWakeReason Error setting wake reason (reportID = 0xc5, Return Value = 0xe00002ca)
- 2022-02-20 13:41:19.836390+0800 0x849 Default 0x0 0 0 kernel: (AppleTopCaseHIDEventDriver) [HID] [ATC] [Error] AppleDeviceManagementHIDEventService::setWakeReason Error setting wake reason (reportID = 0xc5, Return Value = 0xe00002e9)
- 2022-02-20 13:41:30.930389+0800 0x74 Default 0x0 0 0 kernel: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: XDCI CNVW
- 2022-02-20 13:41:30.930391+0800 0x74 Default 0x0 0 0 kernel: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: XDCI CNVW
- 2022-02-20 13:41:38.007344+0800 0x24b8 Error 0x0 102 0 powerd: [powerd:sleepWake] PID 150 is not entitled to set wake reason
- 2022-02-20 13:41:43.785264+0800 0x312a Default 0x0 0 0 kernel: (AppleTopCaseHIDEventDriver) [HID] [ATC] AppleDeviceManagementHIDEventService::processWakeReason Wake reason: Host (0x01)
- 2022-02-20 13:41:47.370538+0800 0x3171 Default 0x0 0 0 kernel: (AppleTopCaseHIDEventDriver) [HID] [ATC] AppleDeviceManagementHIDEventService::processWakeReason Wake reason: Host (0x01)
复制代码
2022/02/25更新:
睡眠问题解决,放弃BCM94360cs2的PCIE接口+usb供电的模式,转而使用转接卡插在主板m.2 wifi接口上,无需额外接usb供电,端口重新定制,睡眠已正常
目前仍存在的问题:
1.cpu名称无法显示 2.内存仅能运行在4000MHZ频率上(非macOS问题,应该是主板和内存的兼容性问题,可能需要手动超频)
2022/03/04更新:
还是回到了用PCIE接口的BCM94360,原因是m2接口的会有唤醒假死现象,且不能在BIOS中使用蓝牙键鼠。现在使用usb3.0转2.0的方式接在主板3.0接口上,可以内置不会妙醒
2022/03/13更新:
可以说是反复横跳。睡眠又莫名出了问题,又用回了M2版的无线网卡,前置面板必须插主板下方的20针USB3.0接口,上面那个会多出一些奇怪的端口。现在重新定制usb,共有17个端口,去掉前面板USB2.0对应的3.0端口(实际不存在)以及前面板3.0对应的2.0端口(没必要)限制到15个端口。现在睡眠后通过蓝牙设备唤醒蓝牙不会假死,就是有时需要半分钟恢复连接。
|
|