本帖最后由 RealGold 于 2012-2-19 16:41 编辑
MultiBeast 4.1.0: Lion Edition 附4.2.1下载地址
MultiBeast為雪豹的引導与驅動起了無比的貢獻,欣聞已升級為4.0,特為Lion服務,轉載給大家。先勾出幾個重點,以後慢慢添加安裝圖片及說明。
Today MultiBeast was updated to version 4.0, specifically for Lion. MultiBeast 4.0: Lion Edition is ONLY for 10.7.x. For 10.6.x, use MultiBeast 3.9: Snow Leopard Edition. The latest versions are now available at tonymacx86.com/downloads.
MultiBeast 4.2.1 Released 2011-12-17
Internal Changes:
- Fixed invalid serial number for iMac12,1
- Fixed invalid serial number for iMac12,2
- Fixed invalid serial number for MacBookPro6,1
MultiBeast 4.2.0 Released 2011-12-14
Visible Changes:
- Added TRIM Enabler to Drivers & Bootloaders -> Kexts & Enablers -> Disk
- Added AppleRTC Patch for CMOS Reset to Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous (Only needed for previous installs)
Internal Changes:
- Updated Chimera to v1.7.0
- Updated USB 3.0 kext to v1.0.8
- Updated FakeSMC Plugins -> AMD RADEON Plugin
- Updated FakeSMC Plugins -> NVIDIA Plugin
- Added AppleRTC Patch for CMOS Reset to EasyBeast
- Added AppleRTC Patch for CMOS Reset to UserDSDT
- Added AppleRTC Patch for CMOS Reset to Extension Migration Tool
MultiBeast 4.1.0 Released 2011-11-08
Visible Changes:
- Updated EasyBeast description to include all org.chameleon.Boot.plist options used, all file names and all installation locations.
- Updated UserDSDT description to include all org.chameleon.Boot.plist options used, all file names and all installation locations.
- Updated each kext description to include the exact file names and installation location.
- Updated descriptions for Customization -> Boot Options and all sub-choices.
- Updated description for System Utilities and removed Rebuild Caches as it is no longer relevant in Lion.
- Replace VoodooPS2Controller and VoodooPS2TrackPad with PS/2 Keyboard/Mice and Trackpads which is 32/64-bit.
- Added ATI 48xx Patch for 10.7.2 from netkas to Graphics
- Added NVIDIA GF100 Fermi Patches to Graphics
- Moved NVIDIA Fermi OpenCL Enabler 10.7.0 / 10.7.1 under NVIDIA GF100 Fermi Patches and renamed it OpenCL Enabler 10.7.0 / 10.7.1
- Added OpenCL Enabler 10.7.2 to Graphics -> NVIDIA GF100 Fermi Patches.
Internal Changes:
- Updated Lnx2Mac's RTL81xx Ethernet to v0.0.90.
- Updated Realtek Gigabit Ethernet to v2.0.6 for 10.7
- Updated Chimera to v1.6.0
- Updated USB 3.0 kext to v1.0.7.
- Updated 3rdParty SATA to v0.3
- Updated 3rdParty eSATA to v0.3
- Added darkwake=0 to EasyBeast and UserDSDT /Extra/org.chameleon.Boot.plist kernel flags.
- Added UseKernelCache=Yes to EasyBeast and UserDSDT /Extra/org.chameleon.Boot.plist.
- Added GenerateCStates=Yes and GeneratePStates=Yes to UserDSDT /Extra/org.chameleon.Boot.plist.
- Changed EasyBeast to boot 64-bit kernel by default.
9月15日更新:
Visible Changes:
- Restored USB 3.0 to Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous.
Internal Changes:
- Fixed EasyBeast to correctly install IOUSBFamily Rollback.
Full list of changes更新日志:
- Added Extension Migration Tool which copies the contents of /Extra/Extensions to /System/Library/Extensions and deletes /Extra/Extensions and /Extra/Extension.mkext. It will also add UseKernelCache=Yes to /Extra/org.chameleon.Boot.plist
- Replaced Chimera v1.4.1 r877 with v1.5.4 r1394. This version adds GraphicsEnabler support for additional ATI and NVIDIA cards along with adding support for the Intel HD 3000 GPU in Sandy Bridge CPUs. Also includes olegpronin's Facetime fix for non-RAID volumes. You need to add SkipFTFix=Yes to /Extra/org.chameleon.Boot.plist when booting from a RAID volume.
- Added to Customization -> Boot Options -> PCI Configuration Fix. Adds npci=0x2000 to Kernel Flags in /Extra/org.chameleon.Boot.plist
- Added to Customization -> Boot Options -> Use KernelCache. Adds UseKernelCache=Yes to /Extra/org.chameleon.Boot.plist
- Added VoodooHDA 0.2.7.3 with prefPane to Advanced Options -> Kexts -> Audio -> VoodooHDA
- Added NVIDIA Fermi OpenCL Enabler to Graphics. This patches GeForceGLDriver using patch info from netkas.org
- Added ATI 48xx Patch for 10.7.0 from netkas to Graphics
- Added ATI 48xx Patch for 10.7.1 from netkas to Graphics
- Added Macmini5,1 smbios
- Replaced JMicron36x SATA with 3rdParty SATA. This new kext supports ASMEDIA, JMicron and Marvell SATA controllers.
- Replaced JMicron36x eSATA with 3rdParty eSATA. This new kext supports ASMEDIA, JMicron and Marvell SATA controllers.
- Replaced IOPCIFamily Fix with Customization -> Boot Options -> PCI Configuration Fix.
- Removed USB 3.0
- Removed ATI 48xx Patch for 10.6.3
- Removed ATI 48xx Patch for 10.6.4
- Removed ATI 48xx Patch for 10.6.4 Graphics Update
- Removed ATI 48xx Patch for 10.6.5
- Removed ATI 48xx Patch for 10.6.6
- Removed ATI 48xx Patch for 10.6.7
- Removed ATI 48xx Patch for 10.6.8
- Removed Kext Helper b7
- Removed MSR Tools
- Updated all kext installations to install to /System/Library/Extenstions instead of /Extra/Extensions
- Installation of Chimera will rename /Extra/com.apple.Boot.plist to /Extra/org.chameleon.Boot.plist
- Added npci=0x2000 to all kernel flags
- Updated EasyBeast and UserDSDT to install Chimera v1.5.4 r1394
- Updated EasyBeast to use 3rdParty SATA instead of JMircon 36x SATA.
- Updated Kext Utility to 2.5.0b
- Changed all boot options choices to use org.chameleon.Boot.plist
If this utility has helped you, please consider a contribution to support further MultiBeast development. Thanks in advance, and enjoy!
下載:http://www.tonymacx86.com/1010110101/MultiBeast-4.1.0.ziphttp://www.tonymacx86.com/C:Dq-OCPpT/MultiBeast-4.2.1.zip
網盤下載(xdod):https://bbs.pcbeta.com/viewthread-868114-1-1.html
雪豹版:https://bbs.pcbeta.com/viewthread-868114-1-1.html
|