！！！最简单安装Leopard10.5.1(ToH，AMD ONLY，支持SATA2） 放出 ！！！附种子链接
Intel的用户不用看了，这个版本只支持AMD（SSE2/SSE3）
国外刚刚放出，已经破解的ToH版。看起来成功率挺高的，失败的也只要自己装一下显卡驱动。
安装方式非常简单，下载-〉刻盘-〉安装（支持SATA2 ）
文件链接在1楼最后。
MD5SUM : 9fa4a7e1726757b958ce8da3a6fe8187
付部分原文
That's an iso I made for my own use.
the kernel is Toh kernel 9.1.0.
It's 32bits until a kernel allow to boot without "-legacy".
The DVD is patched to run on your PC, all installation packages are originals (except MacOSXUpd 10.5.1 which needed to be repacked) and patched automatically in the end of the installation process. Darwin bootloader is installed at the very end. (See FixLeo.pkg)
Only English and French are available.
Gutenprint Printers Drivers and drivers for Geforce 8800GTX/GTS(NVinject 0.1.3) are available too.
It runs fine on the following machine :
- Athlon 64 X2 4200+ S939
- ASUS A8N5X NForce 4
- 4 x 512 MB DDR400
- Maxtor 250 GB Sata2
- Geforce 8800 GTS
If system freezes when you try to reach the net, deactivate dhcp and configure your inte***ce manually.
It seems to be because DHCP set 2 DNS servers (your router) instead of one).
1 - Download
2 - Burn
3 - Install
4 - Enjoy
Zephyroth.
MD5SUM : 9fa4a7e1726757b958ce8da3a6fe8187 - I don't need wireless support so I didn't include third party drivers about that
- I have a Geforce 8800 GTS so there's no Natit but NVinject and some kexts modified for 320, 512, 640 and 768 MB, there are some kexts named ATI**** but I don't know anything about ATI support, if you don't own a Geforce 8800, you must boot in VESA mode and install drivers that match your card
I have not used any instructions.
下载ing，要下的抓紧了阿！
种子链接
种子下载在附件
－－TTNK
[ 本帖最后由 TTNK 于 2008-2-4 02:24 编辑 ] |
附件: 您所在的用户组无法下载或查看附件
-
1
评分次数
-
发表于 2007-11-29 02:39
| 
.gif)
|