本帖最后由 franky74 于 2016-1-8 23:52 编辑
感謝各位的幫推,但仍是一無所知呀~
justinnju 大哥 給的連結我看了,但是仍不知道如何使用!
裡面講解的
KEXT 我都有試過,仍是出現一樓的狀況,無論是 Install one of BrcmPatchRAM.kext or BrcmPatchRAM2.kext depending on OS X version, never both. Also, install one firmware kext BrcmFirmwareData.kext or BrcmFirmwareRepo.kext, depending on installation location, never both. BrcmFirmwareRepo.kext: Install to /System/Library/Extensions. This kext is much more memory efficient than BrcmFirmwareData.kext and is the preferred configuration. BrcmFirmwareData.kext: Most appropriate for EFI/Clover/kexts. BrcmFirmwareRepo.kext, while much more memory efficient, cannot be injected as can BrcmFirmwareData.kext Advanced users: For custom firmware injectors, install the injector plus BrcmFirmwareRepo.kext. This works from either /S/L/E or EFI/Clover/kexts. Optionally, you may remove all the firmwares from BrcmFirmwareRepo.kext/Contents/Resources. If you're using the injector from Clover/kexts, the IOProviderClass in the Info.plist for BrcmFirmwareRepo.kext must be changed from "disabled_IOResources" to "IOResources". And still, you may find it unreliable... as that is the way Clover kext injection is (it does not simulate kext installation perfectly). In testing, best result was obtained if you replace the IOKitPersonalities entry in BrcmFirmwareRepo.kext Info.plist with that of the injector kext (no need for the injector at that point).
還是
BrcmBluetoothInjector.kextTo be used for OS X 10.11 or newer. This kext is a simple injector... it does not contain a firmware uploader. Try this kext if you wish to see if the built-in firmware uploader in 10.11+ will work for your device. Do not use any of the other kexts (BrcmPatchRAM, BrcmPatchRAM2, BrcmFirmwareRepo, or BrcmFirmwareData) with this kext. This kext is not provided in the distribution ZIP. You can build it if you wish to try it. It was removed as it presense was causing confusion for those that don't read carefully and didn't install the preferred kexts correctly. 還有這個 The patch for 10.11 is: <dict> <key>Comment</key> <string>10.11.dp1+ BT4LE-Handoff-Hotspot, credit RehabMan based on Dokterdok original</string> <key>Find</key> <data>SIX/dEdIiwc=</data> <key>Name</key> <string>IOBluetoothFamily</string> <key>Replace</key> <data>Qb4PAAAA60Q=</data></dict>
都有添加在CONFIG
但仍然在 10.11上出現支援低功耗藍牙:否支援Handoff:否支援Instant Hot Spot:否晶片組 : UNKNOWN(ffff)而USB設備中仍然沒有出現 20702A0
|