谁帮发几个RehabMan下的几个补丁，我这死活打不开那网址。。

cqwww

下到本地就LOAD进去了一次，然后就打不开了

RehabMan 下的这几个补丁


Brightness Fix
Brightness fix (Haswell)


这2个

口袋妖怪heart

Brightness Fix的是：

1. #Maintained by: RehabMan for: Laptop Patches
   
2. #graphics_PNLF.txt
   
3. 
   
4. # This patch enables the brightness slider in SysPrefs->Displays
   
5. # and will also enable activation of sleep mode by closing
   
6. # the laptop lid.
   
7. 
   
8. # This patch is a "basic" PNLF patch and doesn't attempt
   
9. # to fix various common problems with the backlight control.
   
10. #
    
11. # For advanced patches, see:
    
12. #   graphics_PNLF_ivy_sandy.txt
    
13. #   graphics_PNLF_haswell.txt
    
14. #
    
15. 
    
16. into_all device label PNLF remove_entry;
    
17. into definitionblock code_regex . insert
    
18. begin
    
19. Scope (_SB)\n
    
20. {\n
    
21.     Device (PNLF)\n
    
22.     {\n
    
23.         Name (_ADR, Zero)\n
    
24.         Name (_HID, EisaId ("APP0002"))\n
    
25.         Name (_CID, "backlight")\n
    
26.         Name (_UID, 10)\n
    
27.         Name (_STA, 0x0B)\n
    
28.     }\n
    
29. }\n
    
30. end;

复制代码

Brightness fix (Haswell/Broadwell)的是：

1. #Maintained by: RehabMan for: Laptop Patches
   
2. #graphics_PNLF_haswell.txt
   
3. 
   
4. # This patch enables the brightness slider in SysPrefs->Displays
   
5. # and will also enable activation of sleep mode by closing
   
6. # the laptop lid.
   
7. #
   
8. # This particular version is intended to be used with ACPIBacklight.kext
   
9. # although it can also be used with AppleBacklight.kext,
   
10. # provided AppleBacklight.kext is patched to recognize your
    
11. # display or an injector is used to set brightness levels.
    
12. #
    
13. # See this thread for more information:
    
14. #     http://www.tonymacx86.com/hp-probook-mavericks/121031-native-brightness-working-without-blinkscreen-using-patched-applebacklight-kext.html
    
15. # (also read any linked threads)
    
16. #
    
17. # Note: This patch should be applied to the DSDT or SSDT that defines
    
18. # your integrated graphics device (always at _ADR 0x00020000)
    
19. #
    
20. # This patch works for both Haswell and Broadwell graphics
    
21. #
    
22. 
    
23. into_all device label PNLF remove_entry;
    
24. into_all device name_adr 0x00020000 code_regex (OperationRegion\s\(RMPC,\sPCI_Config[^\}]*\}) remove_matched;
    
25. 
    
26. into device name_adr 0x00020000 insert
    
27. begin
    
28. OperationRegion (RMPC, PCI_Config, 0x10, 4)\n
    
29. Field (RMPC, AnyAcc, NoLock, Preserve)\n
    
30. {\n
    
31.     BAR1,32,\n
    
32. }\n
    
33. Device (PNLF)\n
    
34. {\n
    
35.     // normal PNLF declares (note some of this probably not necessary)\n
    
36.     Name (_ADR, Zero)\n
    
37.     Name (_HID, EisaId ("APP0002"))\n
    
38.     Name (_CID, "backlight")\n
    
39.     Name (_UID, 15)\n
    
40.     Name (_STA, 0x0B)\n
    
41.     //define hardware register access for brightness\n
    
42.     // lower nibble of BAR1 is status bits and not part of the address\n
    
43.     OperationRegion (BRIT, SystemMemory, And(^BAR1, Not(0xF)), 0xe1184)\n
    
44.     Field (BRIT, AnyAcc, Lock, Preserve)\n
    
45.     {\n
    
46.         Offset(0x48250),\n
    
47.         LEV2, 32,\n
    
48.         LEVL, 32,\n
    
49.         Offset(0x70040),\n
    
50.         P0BL, 32,\n
    
51.         Offset(0xc8250),\n
    
52.         LEVW, 32,\n
    
53.         LEVX, 32,\n
    
54.         Offset(0xe1180),\n
    
55.         PCHL, 32,\n
    
56.     }\n
    
57.     // LMAX: use 0xad9/0x56c/0x5db to force OS X value\n
    
58.     //       or use any arbitrary value\n
    
59.     //       or use 0 to capture BIOS setting\n
    
60.     Name (LMAX, 0xad9)\n
    
61.     // KMAX: defines the unscaled range in the _BCL table below\n
    
62.     Name (KMAX, 0xad9)\n
    
63.     // _INI deals with differences between native setting and desired\n
    
64.     Method (_INI, 0, NotSerialized)\n
    
65.     {\n
    
66.         // This 0xC value comes from looking what OS X initializes this\n
    
67.         // register to after display sleep (using ACPIDebug/ACPIPoller)\n
    
68.         Store(0xC0000000, LEVW)\n
    
69.         // determine LMAX to use\n
    
70.         If (LNot(LMAX)) { Store(ShiftRight(LEVX,16), LMAX) }\n
    
71.         If (LNot(LMAX)) { Store(KMAX, LMAX) }\n
    
72.         If (LNotEqual(LMAX, KMAX))\n
    
73.         {\n
    
74.             // Scale all the values in _BCL to the PWM max in use\n
    
75.             Store(0, Local0)\n
    
76.             While (LLess(Local0, SizeOf(_BCL)))\n
    
77.             {\n
    
78.                 Store(DerefOf(Index(_BCL,Local0)), Local1)\n
    
79.                 Divide(Multiply(Local1,LMAX), KMAX,, Local1)\n
    
80.                 Store(Local1, Index(_BCL,Local0))\n
    
81.                 Increment(Local0)\n
    
82.             }\n
    
83.             // Also scale XRGL and XRGH values\n
    
84.             Divide(Multiply(XRGL,LMAX), KMAX,, XRGL)\n
    
85.             Divide(Multiply(XRGH,LMAX), KMAX,, XRGH)\n
    
86.         }\n
    
87.         // adjust values to desired LMAX\n
    
88.         Store(ShiftRight(LEVX,16), Local1)\n
    
89.         If (LNotEqual(Local1, LMAX))\n
    
90.         {\n
    
91.             Store(And(LEVX,0xFFFF), Local0)\n
    
92.             If (LOr(LNot(Local0),LNot(Local1))) { Store(LMAX, Local0) Store(LMAX, Local1) }\n
    
93.             Divide(Multiply(Local0,LMAX), Local1,, Local0)\n
    
94.             //REVIEW: wait for vblank before setting new PWM config\n
    
95.             //Store(P0BL, Local7)\n
    
96.             //While (LEqual (P0BL, Local7)) {}\n
    
97.             Store(Or(Local0,ShiftLeft(LMAX,16)), LEVX)\n
    
98.         }\n
    
99.     }\n
    
100.     // _BCM/_BQC: set/get for brightness level\n
     
101.     Method (_BCM, 1, NotSerialized)\n
     
102.     {\n
     
103.         // store new backlight level\n
     
104.         Store(Match(_BCL, MGE, Arg0, MTR, 0, 2), Local0)\n
     
105.         If (LEqual(Local0, Ones)) { Subtract(SizeOf(_BCL), 1, Local0) }\n
     
106.         Store(Or(DerefOf(Index(_BCL,Local0)),ShiftLeft(LMAX,16)), LEVX)\n
     
107.     }\n
     
108.     Method (_BQC, 0, NotSerialized)\n
     
109.     {\n
     
110.         Store(Match(_BCL, MGE, And(LEVX, 0xFFFF), MTR, 0, 2), Local0)\n
     
111.         If (LEqual(Local0, Ones)) { Subtract(SizeOf(_BCL), 1, Local0) }\n
     
112.         Return(DerefOf(Index(_BCL, Local0)))\n
     
113.     }\n
     
114.     Method (_DOS, 1, NotSerialized)\n
     
115.     {\n
     
116.         // Note: Some systems have this defined in DSDT, so uncomment\n
     
117.         // the next line if that is the case.\n
     
118.         //External(^^_DOS, MethodObj)\n
     
119.         ^^_DOS(Arg0)\n
     
120.     }\n
     
121.     // extended _BCM/_BQC for setting "in between" levels\n
     
122.     Method (XBCM, 1, NotSerialized)\n
     
123.     {\n
     
124.         // store new backlight level\n
     
125.         If (LGreater(Arg0, XRGH)) { Store(XRGH, Arg0) }\n
     
126.         If (LAnd(Arg0, LLess(Arg0, XRGL))) { Store(XRGL, Arg0) }\n
     
127.         Store(Or(Arg0,ShiftLeft(LMAX,16)), LEVX)\n
     
128.     }\n
     
129.     Method (XBQC, 0, NotSerialized)\n
     
130.     {\n
     
131.         Store(And(LEVX,0xFFFF), Local0)\n
     
132.         If (LGreater(Local0, XRGH)) { Store(XRGH, Local0) }\n
     
133.         If (LAnd(Local0, LLess(Local0, XRGL))) { Store(XRGL, Local0) }\n
     
134.         Return(Local0)\n
     
135.     }\n
     
136.     // Set XOPT bit 0 to disable smooth transitions\n
     
137.     // Set XOPT bit 1 to wait for native BacklightHandler\n
     
138.     // Set XOPT bit 2 to force use of native BacklightHandler\n
     
139.     Name (XOPT, 0x02)\n
     
140.     // XRGL/XRGH: defines the valid range\n
     
141.     Name (XRGL, 25)\n
     
142.     Name (XRGH, 2777)\n
     
143.     // _BCL: returns list of valid brightness levels\n
     
144.     // first two entries describe ac/battery power levels\n
     
145.     Name (_BCL, Package()\n
     
146.     {\n
     
147.         2777,\n
     
148.         748,\n
     
149.         0,\n
     
150.         35, 39, 44, 50,\n
     
151.         58, 67, 77, 88,\n
     
152.         101, 115, 130, 147,\n
     
153.         165, 184, 204, 226,\n
     
154.         249, 273, 299, 326,\n
     
155.         354, 383, 414, 446,\n
     
156.         479, 514, 549, 587,\n
     
157.         625, 665, 706, 748,\n
     
158.         791, 836, 882, 930,\n
     
159.         978, 1028, 1079, 1132,\n
     
160.         1186, 1241, 1297, 1355,\n
     
161.         1414, 1474, 1535, 1598,\n
     
162.         1662, 1728, 1794, 1862,\n
     
163.         1931, 2002, 2074, 2147,\n
     
164.         2221, 2296, 2373, 2452,\n
     
165.         2531, 2612, 2694, 2777,\n
     
166.     })\n
     
167. }\n
     
168. end;

复制代码

cqwww

口袋妖怪heart 发表于 2016-2-26 14:09
Brightness Fix的是：Brightness fix (Haswell/Broadwell)的是：

多谢。。。。。。。。

jiangzhourui

顶ls，正在寻找

cqwww

52hh 发表于 2016-2-26 14:37
把它解压到你的文档文件夹，然后在MacISL中定义源

多谢，之前就定义了，不加载，后来明白了，得file://local..开头才行。。。

性感小伙

像楼主这样的帖子我们就得顶

303734056

不知道我华硕的本子，为什么本地和添加网址的都打不开。。。

ggkll

谢谢！！！！！！！！！！！！！！！怎么定义元？

ggkll

谢谢！！！看看亮度怎么养

jimmy19990

你需要科学上网

liwenloveyou

好像也是打不开，必须本地的

sdw899

太好了，找的眼都绿了。谢谢

魔道逆天地

自己下载zip啊

c521wy

谢谢！！！！！！！！！！！！！！！怎么定义元？

blackblue007

太好了，我也没法下载得来

zero816

52hh 发表于 2016-2-26 14:37
把它解压到你的文档文件夹，然后在MacISL中定义源

将四楼的补丁包下载下来，然后解压放在合适的位置

bin5345

下来试试，折腾好几天了

1065852715

我来看看。。。。。。

jxtm

感谢分享！谢谢！