BIOS设置如下:
BIOS Settings (Gigabyte BIOS version F9b):
Start with Load Optimized Defaults then make (or confirm) the following settings -- important settings in bold:
M.I.T.
Extreme Memory Profile (X.M.P.) --> Profile 1
BIOS
Windows 8/10 Features --> Other OS
CSM Support --> Disabled
Secure Boot will be disabled by default, but good to check
Peripherals
Intel Platform Trust Technology (PTT) --> Disabled
Thunderbolt(TM) Configuration
TBT Vt-d Base Security --> Disabled
Thunderbolt Boot Support --> Disabled
Security Level --> No Security
Discrete Thunderbolt Configuration
Thunderbolt USB Support --> Enable/Disable either one is okay
GPIO3 Force Pwr --> Enabled
DTBT Configuration (no changes made although I did try the following two, but not sure if there's any benefit):
Reserved Memory --> 737
Reserved PMemory --> 1184
USB Configuration
Legacy USB Support --> Enabled
XHCI Hand-off --> Enabled
Network Stack Configuration
Network Stack --> Disabled
Chipset
Vt-d --> Disabled
Internal Graphics --> Enabled
DVMT Pre-Alloc --> 64M
DVMT Total Gfx Mem --> 256M
Audio Controller --> Enabled
Above 4G Decoding --> Enabled
Power
ErP --> Disabled
RC6 (Render Standby) --> Enabled