本帖最后由 暮已晚 于 2020-8-23 13:10 编辑
- HP EliteDesk 800 G2 Tower PC
复制代码
- Skylake
- HP EliteDesk 800 G2 TWR
- MOBO HP 8053 (U3E1)
- Intel® 8 Q170
- BIOS 02.47
- Intel Core i7 6700 @ 3.40GHz Skylake
- GPU: Integrated: Intel® HD Graphics 530
- 8GB DDR4 2133
- Audio: Realtek ALC 221 Audio (revision 0x100103)
- Network: Intel® I219LM Gigabit Network Connection LOM
- Display: HP ProDisplay P222va
一、BIOS更新与配置从这里下载最新的BIOS(目前为发布于2020年5月11日的02.47版) https://support.hp.com/cn-zh/drivers/selfservice/hp-elitedesk-880-g2-tower-pc/8961042/model/9009391?sku=L1G84AV 把下载的.bin文件放在目录EFI/HP/BIOS/new下(如果没有则新建),更新完毕后需要设置BIOS,否则开不了机。
- 2、BIOS设置
- Broke Raid without any problem on booting from one disk (computer came with no raid)Setup disk as AHCI (there is no option on the BIOS)Advanced > Security > TPM Embedded Security > TPM Device HiddenAdvanced > Security > BIOS SureStart > Unchecked ALLAdvanced > Security > System Management Command UncheckedAdvanced > Security > SIntel Software Guard Extensions (SGX) DisableAdvanced > Boot Options > UEFI boot order Checked (do this or else it will not boot from the stick)Advanced > Boot Options > Audio Alerts During Boot UncheckedAdvanced > Secure Boot Configuration > Unchecked ALLAdvanced > Secure Boot Configuration > Configure Legacy Support and Secure Boot Legacy Support Enable and Secure Boot DisableAdvanced > System Options > Configure Storage Controller for RAID UncheckedAdvanced > System Options > VTx CheckedAdvanced > System Options > VTd UncheckedAdvanced > System Options > PCI* UncheckedAdvanced > System Options > Allow PCIe/PCI SERR# Interrupt CheckedAdvanced > Built-In Device Options > Video memory size 512MB hereAdvanced > Built-In Device Options > Audio Device CheckedAdvanced > Built-In Device Options > Internal Speakers CheckedAdvanced > Port Options > Serial Port A UncheckedAdvanced > Port Options > SATA* CheckedAdvanced > Port Options > *USB* CheckedAdvanced > Port Options > USB Charging Port Function CheckedAdvanced > Port Options > Media Card Reader/SD_RDR USB CheckedAdvanced > Port Options > Restrict USB Devices Allow all USB DevicesAdvanced > Power Management Options > Runtime Power Management CheckedAdvanced > Power Management Options > Extended Idle Power States CheckedAdvanced > Power Management Options > S5 Maximum Power Savings CheckedAdvanced > Power Management Options > SATA Power Management CheckedAdvanced > Power Management Options > PCI Express Power Management CheckedAdvanced > Power Management Options > Power On from Keyboard Ports UncheckedAdvanced > Power Management Options > Unique Sleep State Blink Rates UncheckedAdvanced > Remote Management Options > Active Management (AMT) UncheckedAdvanced > Option ROM Launch Policy > Configure Option ROM Launch Policy > All UEI for the multimonitor support on boot
复制代码
三:EFI:
|