CFG锁问题

xzy2015

这是怎么回事

0x1C605                         One Of: CFG Lock, VarStoreInfo (VarOffset/VarName): 0x7A, VarStore: 0x6, QuestionId: 0x6C, Size: 1, Min: 0x0, Max 0x1, Step: 0x0 {05 A6 77 05 78 05 6C 00 06 00 7A 00 00 10 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00}
0x1C62B                                 Default: DefaultId: 0x0, Value (8 bit): 0x1 {5B 1B 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00}
0x1C646                                 Default: DefaultId: 0x1, Value (8 bit): 0x1 {5B 1B 01 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00}
0x1C661                                 One Of Option: Disabled, Value (8 bit): 0x0 {09 1C 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00}
0x1C67D                                 One Of Option: Enabled, Value (8 bit): 0x1 {09 1C 11 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00}

Misuzu0723

setup_var 0x7A 0x0就完事儿了

frankkie

你们都是在谈外星语

lgh07711

我的CFG Lock, VarStore: 0x3，MSR Lock, VarStore: 0x3，两个都用setup_var xxxx 0x0了，都没用。依然显示MSR locked until next reset

xukailiang

主板开关就简单

xzy2015

xukailiang 发表于 2020-3-28 00:10
主板开关就简单

thinkpad是隐藏的，bios里没有开关

xzy2015

Misuzu0723 发表于 2020-3-27 21:30
setup_var 0x7A 0x0就完事儿了

不顶用，会lookup for setup variable，然后就没有下文了

庄森

那位移量还是没找到。就是地址没找对。

xzy2015

庄森 发表于 2020-3-31 15:07
那位移量还是没找到。就是地址没找对。

那怎么解决呢？

庄森

百度搜“不用刷BIOS也能改cfg”，有教程。