Win10论坛

Win10正式版系统下载主题平板

重定义Modern UI,打造完美Windows全新体验

Windows10下载|安装|新手宝典|必备软件

搜索
查看: 3501|回复: 60

[分享] asus X84HR(K84HR) install El Capitan [复制链接]

Kinvan.Hon

Rank: 7Rank: 7Rank: 7

UID
3113616
帖子
629
PB币
1009
贡献
0
技术
6
活跃
1307
发表于 2016-2-16 19:53:11 |显示全部楼层
英特尔® 酷睿™ i3 处理器的版本可直接用本文的所有附件,其他处理器的仅供参考。
采用Clover最新版本引导
安装时的Clover配置如下
安装原版El Capitan,用Apple官方制作启动盘的方法(https://support.apple.com/zh-cn/HT201372)老是出现禁止符号,于是用UniBeast制作(http://www.tonymacx86.com/el-capitan-desktop-guides/172672-unibeast-install-os-x-el-capitan-any-supported-intel-based-pc.html#create_unibeast),终于进入安装界面。
安装好后,正常启动用到的Clover配置文件,用此配置文件引导,显卡可正确识别,并以原生分辨率输出(还不是32位真彩色),将附件的kexts安装到L/E下,其中电池电量显示需在DSDT中添加以下代码:
into method label B1B2 remove_entry;
into definitionblock code_regex . insert
begin
Method (B1B2, 2, NotSerialized) { Return (Or (Arg0, ShiftLeft (Arg1, 8))) }\n
end;

# not really for battery, but might come in handy to read fan speed(s)
into device label EC0 code_regex TAH0,\s+16 replace_matched begin TH00,8,TH01,8 end;
into device label EC0 code_regex TAH1,\s+16 replace_matched begin TH10,8,TH11,8 end;
into method label TACH code_regex \(TAH0, replace_matched begin (B1B2(TH00,TH01), end;
into method label TACH code_regex \(TAH1, replace_matched begin (B1B2(TH10,TH11), end;
into method label GFAN code_regex \(\\_SB\.PCI0\.LPCB\.EC0\.TAH0, replace_matched begin (B1B2(\\_SB.PCI0.LPCB.EC0.TH00,\\_SB.PCI0.LPCB.EC0.TH01), end;

# battery EC
into device label EC0 code_regex B0SN,\s+16 replace_matched begin B0S0,8,B0S1,8 end;
into device label EC0 code_regex B1SN,\s+16 replace_matched begin B1S0,8,B1S1,8 end;
into method label BIFA code_regex \(B0SN, replace_matched begin (B1B2(B0S0,B0S1), end;
into method label BIFA code_regex \(B1SN, replace_matched begin (B1B2(B1S0,B1S1), end;
into device label EC0 code_regex DT2B,\s+16 replace_matched begin T2B0,8,T2B1,8 end;
into method label SMBR code_regex \(DT2B, replace_matched begin (B1B2(T2B0,T2B1), end;
into method label SMBW code_regex Store\s+\(([^,]*),\s+DT2B\) replace_matched
begin
Store(%1,T2B0) Store(ShiftRight(%1,8),T2B1)
end;

into device label EC0 insert
begin
Method (RDBA, 0, Serialized)\n
{\n
    Name (TEMP, Buffer(0x20) { })\n
    Store (BA00, Index(TEMP, 0x00))\n
    Store (BA01, Index(TEMP, 0x01))\n
    Store (BA02, Index(TEMP, 0x02))\n
    Store (BA03, Index(TEMP, 0x03))\n
    Store (BA04, Index(TEMP, 0x04))\n
    Store (BA05, Index(TEMP, 0x05))\n
    Store (BA06, Index(TEMP, 0x06))\n
    Store (BA07, Index(TEMP, 0x07))\n
    Store (BA08, Index(TEMP, 0x08))\n
    Store (BA09, Index(TEMP, 0x09))\n
    Store (BA0A, Index(TEMP, 0x0A))\n
    Store (BA0B, Index(TEMP, 0x0B))\n
    Store (BA0C, Index(TEMP, 0x0C))\n
    Store (BA0D, Index(TEMP, 0x0D))\n
    Store (BA0E, Index(TEMP, 0x0E))\n
    Store (BA0F, Index(TEMP, 0x0F))\n
    Store (BA10, Index(TEMP, 0x10))\n
    Store (BA11, Index(TEMP, 0x11))\n
    Store (BA12, Index(TEMP, 0x12))\n
    Store (BA13, Index(TEMP, 0x13))\n
    Store (BA14, Index(TEMP, 0x14))\n
    Store (BA15, Index(TEMP, 0x15))\n
    Store (BA16, Index(TEMP, 0x16))\n
    Store (BA17, Index(TEMP, 0x17))\n
    Store (BA18, Index(TEMP, 0x18))\n
    Store (BA19, Index(TEMP, 0x19))\n
    Store (BA1A, Index(TEMP, 0x1A))\n
    Store (BA1B, Index(TEMP, 0x1B))\n
    Store (BA1C, Index(TEMP, 0x1C))\n
    Store (BA1D, Index(TEMP, 0x1D))\n
    Store (BA1E, Index(TEMP, 0x1E))\n
    Store (BA1F, Index(TEMP, 0x1F))\n
    Return (TEMP)\n
}\n
end;

into device label EC0 insert
begin
Method (WRBA, 1, Serialized)\n
{\n
    Name (TEMP, Buffer(0x20) { })\n
    Store (Arg0, TEMP)\n
    Store (DerefOf(Index(TEMP, 0x00)), BA00)\n
    Store (DerefOf(Index(TEMP, 0x01)), BA01)\n
    Store (DerefOf(Index(TEMP, 0x02)), BA02)\n
    Store (DerefOf(Index(TEMP, 0x03)), BA03)\n
    Store (DerefOf(Index(TEMP, 0x04)), BA04)\n
    Store (DerefOf(Index(TEMP, 0x05)), BA05)\n
    Store (DerefOf(Index(TEMP, 0x06)), BA06)\n
    Store (DerefOf(Index(TEMP, 0x07)), BA07)\n
    Store (DerefOf(Index(TEMP, 0x08)), BA08)\n
    Store (DerefOf(Index(TEMP, 0x09)), BA09)\n
    Store (DerefOf(Index(TEMP, 0x0A)), BA0A)\n
    Store (DerefOf(Index(TEMP, 0x0B)), BA0B)\n
    Store (DerefOf(Index(TEMP, 0x0C)), BA0C)\n
    Store (DerefOf(Index(TEMP, 0x0D)), BA0D)\n
    Store (DerefOf(Index(TEMP, 0x0E)), BA0E)\n
    Store (DerefOf(Index(TEMP, 0x0F)), BA0F)\n
    Store (DerefOf(Index(TEMP, 0x10)), BA10)\n
    Store (DerefOf(Index(TEMP, 0x11)), BA11)\n
    Store (DerefOf(Index(TEMP, 0x12)), BA12)\n
    Store (DerefOf(Index(TEMP, 0x13)), BA13)\n
    Store (DerefOf(Index(TEMP, 0x14)), BA14)\n
    Store (DerefOf(Index(TEMP, 0x15)), BA15)\n
    Store (DerefOf(Index(TEMP, 0x16)), BA16)\n
    Store (DerefOf(Index(TEMP, 0x17)), BA17)\n
    Store (DerefOf(Index(TEMP, 0x18)), BA18)\n
    Store (DerefOf(Index(TEMP, 0x19)), BA19)\n
    Store (DerefOf(Index(TEMP, 0x1A)), BA1A)\n
    Store (DerefOf(Index(TEMP, 0x1B)), BA1B)\n
    Store (DerefOf(Index(TEMP, 0x1C)), BA1C)\n
    Store (DerefOf(Index(TEMP, 0x1D)), BA1D)\n
    Store (DerefOf(Index(TEMP, 0x1E)), BA1E)\n
    Store (DerefOf(Index(TEMP, 0x1F)), BA1F)\n
}\n
end;

into device label EC0 code_regex BDAT,\s+256 replace_matched
begin
//BDAT, 256,\n
BA00,8,BA01,8,BA02,8,BA03,8,\n
BA04,8,BA05,8,BA06,8,BA07,8,\n
BA08,8,BA09,8,BA0A,8,BA0B,8,\n
BA0C,8,BA0D,8,BA0E,8,BA0F,8,\n
BA10,8,BA11,8,BA12,8,BA13,8,\n
BA14,8,BA15,8,BA16,8,BA17,8,\n
BA18,8,BA19,8,BA1A,8,BA1B,8,\n
BA1C,8,BA1D,8,BA1E,8,BA1F,8\n
end;

into method label SMBR code_regex \(BDAT, replaceall_matched begin (RDBA(), end;
into method label SMBR code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end;
into method label SMBW code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end;
into method label ECSB code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end;
into method label ECSB code_regex \(BDAT, replaceall_matched begin (RDBA(), end;


into device label EC0 insert
begin
Method (RDBB, 0, Serialized)\n
{\n
    Name (TEMP, Buffer(0x20) { })\n
    Store (BB00, Index(TEMP, 0x00))\n
    Store (BB01, Index(TEMP, 0x01))\n
    Store (BB02, Index(TEMP, 0x02))\n
    Store (BB03, Index(TEMP, 0x03))\n
    Store (BB04, Index(TEMP, 0x04))\n
    Store (BB05, Index(TEMP, 0x05))\n
    Store (BB06, Index(TEMP, 0x06))\n
    Store (BB07, Index(TEMP, 0x07))\n
    Store (BB08, Index(TEMP, 0x08))\n
    Store (BB09, Index(TEMP, 0x09))\n
    Store (BB0A, Index(TEMP, 0x0A))\n
    Store (BB0B, Index(TEMP, 0x0B))\n
    Store (BB0C, Index(TEMP, 0x0C))\n
    Store (BB0D, Index(TEMP, 0x0D))\n
    Store (BB0E, Index(TEMP, 0x0E))\n
    Store (BB0F, Index(TEMP, 0x0F))\n
    Store (BB10, Index(TEMP, 0x10))\n
    Store (BB11, Index(TEMP, 0x11))\n
    Store (BB12, Index(TEMP, 0x12))\n
    Store (BB13, Index(TEMP, 0x13))\n
    Store (BB14, Index(TEMP, 0x14))\n
    Store (BB15, Index(TEMP, 0x15))\n
    Store (BB16, Index(TEMP, 0x16))\n
    Store (BB17, Index(TEMP, 0x17))\n
    Store (BB18, Index(TEMP, 0x18))\n
    Store (BB19, Index(TEMP, 0x19))\n
    Store (BB1A, Index(TEMP, 0x1A))\n
    Store (BB1B, Index(TEMP, 0x1B))\n
    Store (BB1C, Index(TEMP, 0x1C))\n
    Store (BB1D, Index(TEMP, 0x1D))\n
    Store (BB1E, Index(TEMP, 0x1E))\n
    Store (BB1F, Index(TEMP, 0x1F))\n
    Return (TEMP)\n
}\n
end;

into device label EC0 insert
begin
Method (WRBB, 1, Serialized)\n
{\n
    Name (TEMP, Buffer(0x20) { })\n
    Store (Arg0, TEMP)\n
    Store (DerefOf(Index(TEMP, 0x00)), BB00)\n
    Store (DerefOf(Index(TEMP, 0x01)), BB01)\n
    Store (DerefOf(Index(TEMP, 0x02)), BB02)\n
    Store (DerefOf(Index(TEMP, 0x03)), BB03)\n
    Store (DerefOf(Index(TEMP, 0x04)), BB04)\n
    Store (DerefOf(Index(TEMP, 0x05)), BB05)\n
    Store (DerefOf(Index(TEMP, 0x06)), BB06)\n
    Store (DerefOf(Index(TEMP, 0x07)), BB07)\n
    Store (DerefOf(Index(TEMP, 0x08)), BB08)\n
    Store (DerefOf(Index(TEMP, 0x09)), BB09)\n
    Store (DerefOf(Index(TEMP, 0x0A)), BB0A)\n
    Store (DerefOf(Index(TEMP, 0x0B)), BB0B)\n
    Store (DerefOf(Index(TEMP, 0x0C)), BB0C)\n
    Store (DerefOf(Index(TEMP, 0x0D)), BB0D)\n
    Store (DerefOf(Index(TEMP, 0x0E)), BB0E)\n
    Store (DerefOf(Index(TEMP, 0x0F)), BB0F)\n
    Store (DerefOf(Index(TEMP, 0x10)), BB10)\n
    Store (DerefOf(Index(TEMP, 0x11)), BB11)\n
    Store (DerefOf(Index(TEMP, 0x12)), BB12)\n
    Store (DerefOf(Index(TEMP, 0x13)), BB13)\n
    Store (DerefOf(Index(TEMP, 0x14)), BB14)\n
    Store (DerefOf(Index(TEMP, 0x15)), BB15)\n
    Store (DerefOf(Index(TEMP, 0x16)), BB16)\n
    Store (DerefOf(Index(TEMP, 0x17)), BB17)\n
    Store (DerefOf(Index(TEMP, 0x18)), BB18)\n
    Store (DerefOf(Index(TEMP, 0x19)), BB19)\n
    Store (DerefOf(Index(TEMP, 0x1A)), BB1A)\n
    Store (DerefOf(Index(TEMP, 0x1B)), BB1B)\n
    Store (DerefOf(Index(TEMP, 0x1C)), BB1C)\n
    Store (DerefOf(Index(TEMP, 0x1D)), BB1D)\n
    Store (DerefOf(Index(TEMP, 0x1E)), BB1E)\n
    Store (DerefOf(Index(TEMP, 0x1F)), BB1F)\n
}\n
end;

into device label EC0 code_regex BDA2,\s+256 replace_matched
begin
//BDA2, 256,\n
BB00,8,BB01,8,BB02,8,BB03,8,\n
BB04,8,BB05,8,BB06,8,BB07,8,\n
BB08,8,BB09,8,BB0A,8,BB0B,8,\n
BB0C,8,BB0D,8,BB0E,8,BB0F,8,\n
BB10,8,BB11,8,BB12,8,BB13,8,\n
BB14,8,BB15,8,BB16,8,BB17,8,\n
BB18,8,BB19,8,BB1A,8,BB1B,8,\n
BB1C,8,BB1D,8,BB1E,8,BB1F,8\n
end;

into method label SMBR code_regex \(BDA2, replaceall_matched begin (RDBB(), end;
into method label SMBR code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end;
into method label SMBW code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end;
into method label ECSB code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end;
into method label ECSB code_regex \(BDA2, replaceall_matched begin (RDBB(), end;

# additional work for _BIX method present in some ASUS laptops

into device label EC0 code_regex B0C3,\s+16 replace_matched begin XC30,8,XC31,8 end;
into device label EC0 code_regex B1C3,\s+16 replace_matched begin YC30,8,YC31,8 end;
into_all method label _BIX code_regex \(\^\^LPCB\.EC0\.B0C3, replaceall_matched begin (B1B2(^^LPCB.EC0.XC30,^^LPCB.EC0.XC31), end;
into_all method label _BIX code_regex \(\^\^LPCB\.EC0\.B1C3, replaceall_matched begin (B1B2(^^LPCB.EC0.YC30,^^LPCB.EC0.YC31), end;

# or could remove the _BIX method if it turns out not to work

#into_all method label _BIX remove_entry;

#fix logic error in some newer ASUS DSDTs (issue #23)
into method label FBST code_regex If\s\(CHGS\s\(Zero\)\)[\s]+\{[\s]+Store\s\(0x02,\sLocal0\)[\s]+\}[\s]+Else[\s]+\{[\s]+Store\s\(One,\sLocal0\)[\s]+\} replaceall_matched
begin
If (CHGS (Zero))\n
{\n
    Store (0x02, Local0)\n
}\n
Else\n
{\n
    Store (Zero, Local0)\n
}
end;


无线网卡AR9285,在DSDT中加入以下代码即可使用:
into method label _DSM parent_label WLAN remove_entry;
into device label WLAN parent_label RP02 insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
    If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n
    Return (Package()\n
    {\n
        "device-id", Buffer() { 0x30, 0x00, 0x00, 0x00 },\n
        "name", "pci168c,30",\n
        "AAPL,slot-name", Buffer() { "AirPort" },\n
        "device_type", Buffer() { "AirPort" },\n
        "model", Buffer() { "Atheros 9285 802.11 b/g/n Wireless Network Adapter" },\n
        "subsystem-id", Buffer() { 0x8F, 0x00, 0x00, 0x00 },\n
        "subsystem-vendor-id", Buffer() { 0x6B, 0x10, 0x00, 0x00 },\n
    })\n
}\n
end;


注:DSDT中添加代码请使用MaciASL的Patch
附件: 你需要登录才可以下载或查看附件。没有帐号?注册
1

查看全部评分

Kinvan.Hon

Rank: 7Rank: 7Rank: 7

UID
3113616
帖子
629
PB币
1009
贡献
0
技术
6
活跃
1307
发表于 2016-2-16 19:55:23 |显示全部楼层
还存在的问题:
1、显卡的32位真彩色;
2、显示器睡眠时背光不熄灭;
3、USB3不能用;
......

Kinvan.Hon

Rank: 7Rank: 7Rank: 7

UID
3113616
帖子
629
PB币
1009
贡献
0
技术
6
活跃
1307
发表于 2016-2-16 20:01:53 |显示全部楼层
电量显示和AR9285的DSDT代码来自RehabMan;
kexts来自RehabMan(RealtekRTL8111.kext、ACPIBatteryManager.kext、ACPIBacklight.kext)、EMlyDinEsH(ApplePS2SmartTouchPad.kext、AsusNBFnKeys.kext)、Voodoo;
感谢他们,使得以太网卡、无线网卡、触摸板、键盘及Fn快捷键、背光、电量显示、声音等正常工作。

Kinvan.Hon

Rank: 7Rank: 7Rank: 7

UID
3113616
帖子
629
PB币
1009
贡献
0
技术
6
活跃
1307
发表于 2016-2-16 20:07:02 |显示全部楼层
DSDT使用Clover提取(引导界面按F4),提取出来就已无错(感谢asus的主板设计团队)

没错!我就是逗逗!

Rank: 7Rank: 7Rank: 7

UID
4668927
帖子
2152
PB币
70
贡献
0
技术
3
活跃
758

十周年

发表于 2016-2-16 20:42:23 |显示全部楼层
感谢楼主热心分享!

Rank: 5Rank: 5Rank: 5

UID
4605556
帖子
606
PB币
110
贡献
0
技术
0
活跃
1434
发表于 2016-2-17 20:54:14 |显示全部楼层
谢谢楼主的分享

Rank: 2Rank: 2

UID
3063557
帖子
153
PB币
1
贡献
0
技术
0
活跃
209
发表于 2016-2-28 10:53:19 |显示全部楼层
谢谢分享,下载试试看

Rank: 1

UID
4740202
帖子
29
PB币
33
贡献
0
技术
0
活跃
32
发表于 2016-3-5 13:47:47 |显示全部楼层
感谢LZ分享,我现在装了之后触摸板键盘不能用是怎么回事

Kinvan.Hon

Rank: 7Rank: 7Rank: 7

UID
3113616
帖子
629
PB币
1009
贡献
0
技术
6
活跃
1307
发表于 2016-3-5 15:18:12 |显示全部楼层
xshenpan 发表于 2016-3-5 13:47
感谢LZ分享,我现在装了之后触摸板键盘不能用是怎么回事

ApplePS2SmartTouchPad.kext没有安装。
如果需要在安装时能用键盘,放到Clover对应的目录下。

Rank: 1

UID
4740202
帖子
29
PB币
33
贡献
0
技术
0
活跃
32
发表于 2016-3-5 15:50:26 |显示全部楼层
谢谢,我安装了ApplePS2SmartTouchPad.kext,我现在放在Clover的目录下看看。

Kinvan.Hon

Rank: 7Rank: 7Rank: 7

UID
3113616
帖子
629
PB币
1009
贡献
0
技术
6
活跃
1307
发表于 2016-3-5 16:03:33 |显示全部楼层
xshenpan 发表于 2016-3-5 15:50
谢谢,我安装了ApplePS2SmartTouchPad.kext,我现在放在Clover的目录下看看。

关闭SIP了吗?没关闭的话,安装了也是没作用的。在Clover加入CsrActiveConfig参数,具体做法请参考置顶贴。

Rank: 1

UID
4740202
帖子
29
PB币
33
贡献
0
技术
0
活跃
32
发表于 2016-3-5 16:10:28 |显示全部楼层
kinvanhon 发表于 2016-3-5 16:03
关闭SIP了吗?没关闭的话,安装了也是没作用的。在Clover加入CsrActiveConfig参数,具体做法请参考置顶贴 ...

好的,谢谢

Rank: 1

UID
4740202
帖子
29
PB币
33
贡献
0
技术
0
活跃
32
发表于 2016-3-5 16:18:13 |显示全部楼层
kinvanhon 发表于 2016-3-5 16:03
关闭SIP了吗?没关闭的话,安装了也是没作用的。在Clover加入CsrActiveConfig参数,具体做法请参考置顶贴 ...

我使用的是你提供的config.plist
里面的RtVariables内容是
<key>CsrActiveConfig</key>
<string>0x13</string>
<key>BooterConfig</key>
<string>0x28</string>

Kinvan.Hon

Rank: 7Rank: 7Rank: 7

UID
3113616
帖子
629
PB币
1009
贡献
0
技术
6
活跃
1307
发表于 2016-3-5 16:30:56 |显示全部楼层
xshenpan 发表于 2016-3-5 16:18
我使用的是你提供的config.plist
里面的RtVariables内容是
CsrActiveConfig

0x13已经是关闭部分SIP了,对第三方kext应该没影响。kext是用Kext Utility或Kext Wizard安装吗?手动拷贝到话还要恢复权限,重建缓存的(工具安装的,它默认会做这两步的)。之后重启系统就好了。

Rank: 2Rank: 2

UID
3063557
帖子
153
PB币
1
贡献
0
技术
0
活跃
209
发表于 2016-3-10 08:35:06 |显示全部楼层
谢谢分享,下载看看

Rank: 2Rank: 2

UID
3063557
帖子
153
PB币
1
贡献
0
技术
0
活跃
209
发表于 2016-3-10 08:35:40 |显示全部楼层
还有下载一个,,谢谢

Rank: 2Rank: 2

UID
3427244
帖子
104
PB币
34
贡献
0
技术
0
活跃
223
发表于 2016-3-26 00:39:57 |显示全部楼层
xshenpan 发表于 2016-3-5 16:18
我使用的是你提供的config.plist
里面的RtVariables内容是
CsrActiveConfig

CsrActiveConfig应该设置为0x67,不要用Clover Configurator设置,用PlistEditor吧,设置完了重启,在终端里使用以下命令查看是否关闭:
csrutil status
如果关闭了就显示disable,如果没关闭就会显示enable

Kinvan.Hon

Rank: 7Rank: 7Rank: 7

UID
3113616
帖子
629
PB币
1009
贡献
0
技术
6
活跃
1307
发表于 2016-3-26 10:46:15 |显示全部楼层
本帖最后由 kinvanhon 于 2016-3-26 12:39 编辑
lameonde 发表于 2016-3-26 00:39
CsrActiveConfig应该设置为0x67,不要用Clover Configurator设置,用PlistEditor吧,设置完了重启,在终端 ...

普通用户没必要0x67将所有都disable,0x3足够用了。如果不用第三方未签名kext,全部enable最好。Relevant user options for SIP are as follows:
csr-active-config 0x0 = SIP Enabled (Default)
csr-active-config 0x3 = SIP Partially Disabled (Loads unsigned kexts)
csr-active-config 0x67 = SIP Disabled completely


Rank: 1

UID
4740202
帖子
29
PB币
33
贡献
0
技术
0
活跃
32
发表于 2016-3-26 13:04:38 |显示全部楼层
kinvanhon 发表于 2016-3-26 10:46
普通用户没必要0x67将所有都disable,0x3足够用了。如果不用第三方未签名kext,全部enable最好。Relevant ...

谢谢,现在有声音了,不过要重启一遍才有

Rank: 1

UID
4681172
帖子
51
PB币
19
贡献
0
技术
4
活跃
120
发表于 2016-3-26 13:42:09 |显示全部楼层
楼主能够正常关机吗?之前我用旧方法装,怎么都无法关机断电,又退回10.11去了
回顶部
Copyright (C) 2005-2021 pcbeta.com, All rights reserved
Powered by Discuz!  苏ICP备17027154号
请勿发布违反中华人民共和国法律法规的言论,会员观点不代表远景论坛官方立场。
远景在线 | 远景论坛 | 苹果论坛 | Win10论坛 | Win8论坛 | Win7论坛 | WP论坛 | Office论坛 | 电脑硬件 | 安卓软件