1.) /AI Tweaker/
a.) ASUS MultiCore Enhancement: Auto [optional "Disabled", see important notification below!]
b.) AVX Instruction Core Ratio Negative Offset: "3" [optional "Auto", see important notification below!]
c.) AVX-512 Instruction Core Ratio Negative Offset: "2" [optional "Auto", see important notification below!]
d.) CPU Core Ratio: Sync All Cores [optional "Auto", see important notification below!]
e.) CPU SVID Support: Enabled [fundamental for proper IPG CPU power consumption display]
f.) DRAM Frequency: DDR4-3200MHz
2.) /Advanced/CPU Configuration/
a.) Hyper Threading [ALL]: Enabled
b.) MSR Lock Control: Disabled
3.) /Advanced/CPU Configuration/CPU Power Management Configuration/
a.) Enhanced Intel Speed Step Technology (EIST): Disbaled
b.) Autonomous Core C-States: Enabled
c.) Enhanced Halt State (C1E): Enabled
d.) CPU C6 report: Enabled
e.) Package C-State: C6(non retention) state
f.) Intel SpeedShift Technology: Enabled (crucial for native HWP Intel SpeedShift Technology CPU Power Management)
g.) MFC Mode Override: OS Native
4.) /Advanced/Platform Misc Configuration/
a.) PCI Express Native Power Management: Disabled
b.) PCH DMI ASPM: Disabled
d.) ASPM: Disabled
e.) DMI Link ASPM Control: Disabled
f.) PEG - ASMP: Disabled
5.) /Advanced/System Agent Configuration/
a.) Intel VT for Directed I/O (VT-d): Disabled (see VT-d notification below)
6.) /Boot/
a.) Fast Boot: Disabled
b.) Above 4G Decoding: Off
c.) Set your specific Boot Option Priorities
7.) /Boot/Boot Configuration
a.) Boot Logo Display: Auto (important for E.11 - ASUS Boot Splash Screen Cosmetics)
b.) Boot up NumLock State: Disabled
c.) Setup Mode: Advanced
8.) /Boot/Compatibility Support Module/
a.) Launch CSM: Disabled
9.) /Boot/Secure Boot/
a.) OS Type: Other OS
With F7 and F10 you can save the modified BIOS settings.
Important Notes:
"ASUS MultiCore Enhancement": When set to "Auto", MCE allows you to maximise the overclocking performance optimised by the ASUS core ratio settings. When disabled, MCE allows to set to default core ratio settings.
“ASUS MultiCore Enhancement”：当设置为“Auto”时，MCE允许您最大化通过ASUS核心比率设置优化的超频性能。 禁用时，MCE允许设置为默认核心比率设置。
"CPU Core Ratio - Sync All Cores": Tremendous increase in CPU performance can be achieved with the CPU Core Ratio set to "Sync All Cores". In case of i9-7980XE stock settings (max. turbo 4.4 Ghz), the Geekbench score difference is approx. 51.000 (disabled) compared to 58.000 (enabled)! Note however, that Sync All Cores should be used only in case of the availability of an excellent and extremely sophisticated water cooling system! Otherwise, CPU Core Ratio should be set to "Auto". Further note that with CPU Core Ratio set to "Sync All Cores", the AVX Instruction Core Ratio Negative Offset must be set to "3" and the AVX-512 Instruction Core Ratio Negative Offset must be set to "2". Without the correct core ratio offsets, your system might become unstable with CPU Core Ratio set to "Sync All Cores”!
“CPU核心比率 - 同步所有核心”：CPU核心比率设置为“同步所有核心”可以实现CPU性能的显着提升。 如果是i9-7980XE库存设置（最大turbo 4.4 Ghz），Geekbench得分差异大约为。 51.000（禁用）与58.000（已启用）相比！ 但请注意，只有在具有出色且极其复杂的水冷却系统的情况下，才能使用同步所有核心！ 否则，CPU Core Ratio应设置为“Auto”。 另请注意，在CPU Core Ratio设置为“Sync All Cores”时，AVX指令核心比率负偏移必须设置为“3”，AVX-512指令核心比率负偏移必须设置为“2”。 如果没有正确的核心比率偏移，CPU核心比率设置为“同步所有核心”时，系统可能会变得不稳定！
VT-d Note: For compatibility with VM or parallels, VT-d can be also ENABLED... Verify however, in this case that in your config.plist the boot flag "dart=0" is checked under Arguments in the "Boot" Section of Clover Configurator! However, it might well be that the "dart=0" boot flag is already obsolete.
VT-d注意：为了兼容VM或并行，VT-d也可以启用...但是，验证在这种情况下，在config.plist中，在“Boot”中的Arguments下检查引导标志“dart = 0” “三叶草配置器的一节！ 但是，很可能“dart = 0”引导标志已经过时了。
Intel(R) Power Gadget (IPG) CPU Power Consumption note: for the proper display of the CPU Power Consumption in e.g. the Intel(R) Power Gadget it is absolutely mandatory to enable both /AI Tweaker/CPU SVID Support/.
英特尔（R）电源小工具（IPG）CPU功耗注意：为了正确显示CPU功耗，例如： 英特尔（R）Power Gadget绝对必须启用/ AI Tweaker / CPU SVID支持/。
CPU Core Voltage Correction for ASUS X299 mainboard users: The ASUS Skylake-X BIOS microcode implementation has improved considerably. Former issues with "/AI Tweaker/CPU Core Voltage/" set to "Auto", where the assigned CPU Core Voltages have been too high by far, have been totally removed.
华硕X299主板用户的CPU核心电压校正：华硕Skylake-X BIOS微码实现有了很大改进。 “/ AI Tweaker / CPU核心电压/”设置为“自动”的前问题已被完全删除，其中分配的CPU核心电压过高。
楼主: mrmg
