系统是10.8.3部分启动日志
PCI configuration changed (bridge=3 device=2 cardbus=0)
[ PCI configuration end, bridges 5 devices 12 ]
HDAEnabler: Copyright (c) 2008 by Kabyl
HDAEnabler: Copyright (c) 2008 by Kabyl
HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
[RealtekRTL81xx:init] RealtekRTL81xx.kext v0.0.90 (c)2010-2011 by Lnx2Mac (lnx2mac@gmail.com)
HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
SuperIODevice: found ITE IT8721F on port=0x2e address=0xa30
IT87xxSensors: started
[RealtekRTL81xx:init] _logLevel is now 132 (0x0084)
[RealtekRTL81xx:init] Using updated PHY config method
GeForceSensors (pci1@0): chipset: GT218 (NVA8) bios: 70.18.89.00
GeForceSensors (pci1@0): started
[RealtekRTL81xx:init] init completed
[RTL81xx@0xd000:rtl8168_init_board] NIC identified as RTL8168E-VL/8111E-VL (mcfg=16)
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SAT0@1F,2/AppleIntelPchSeriesAHCI/SPT1@1/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/ST3250318AS Media/IOGUIDPartitionScheme/Macintosh@2
BSD root: disk0s2, major 1, minor 2
Kernel is LP64
com_lnx2mac_RealtekRTL81xx: Ethernet address 00:e0:4c:44:24:3e
[IOBluetoothHCIController][start] -- completed
NVDAStartup: Official
HDAEnabler: Copyright (c) 2008 by Kabyl
HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Previous Shutdown Cause: 5
NVDANV50HAL loaded and registered
HDAEnabler: Copyright (c) 2008 by Kabyl
HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
DSMOS has arrived
Sound assertion "0 != setupHostInterrupt ()" failed in AppleHDAController at line 441 goto Exit
macx_swapon SUCCESS
ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
