来源:http://www.tonymacx86.com/general-help/181059-3rd-party-usb-3-0-genericusbxhci-kext-working-10-11-2-a.html
翻译:理解的就翻了不理解的地方保留原文还请nb大大纠错:多谢mra123指正错误原文:Preliminary testing shows GenericUSBXHCI.kext now working in 10.11.2 with no kernel panics.
初步测试表明此驱动可以工作在10.11.2并且不会引起内核崩溃
The kext, which was unstable and caused kernel panics on 10.11.0 and 10.11.1 is now working for 3rd Party ASMedia and VIA USB 3.0 hubs (Intel ports are native) as well as ASMedia USB 3.1 hubs on 100 series motherboards.
此驱动在10.11及10.11.1上工作不稳定
可驱动asmedia和via的3.0(intel源生了不需要)和asmedia的usb3.1在100系列主板上
Unfortunately this kext is loading but not working for NEC/Renesas 3rd Party USB 3.0 on H67N and X58, although it does load without kernel panics.
苦逼的是此驱动虽然可以载入但是H67N及X58主板上的NEC和Renasas的第三方usb接口然并卵.虽然内核不崩溃了
If you're interested in testing, install using KextBeast to /Library/Extensions. Report your results here.
小白鼠们快来吧!!!!!!!
-----------------------------------------------------------------------------------------------------------更新
本人经过测试也已经成功驱动.
芯片asmedia1042 后置两个 前置无
可以正确识别usb3设备.能够满速运行.
测试设备为闪迪急速至尊64gU盘
不过设备列表usb项目里看不到usb3管理器
也看不到插入的usb设备信息.
usb2设备接入也可以使用.一样看不到设备信息
期待大神继续完善吧----------------------------------------------------------------------------------------------------------更新
12月19日更新测试结果
另一个索泰H61-itx主板(VIA芯片)不能用 放入10.11后开机进入系统登陆界面3秒左右死机。删除GenericUSBXHCI.kext后
恢复